Whirlpool AKZ 801 Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
GB
Follow the instructions on the display
Display
Remove the protective film (if present)
from the display.
Once the required setting
appears on the display it can be
confirmed by pressing the “OK”
button and the next step in
programming can be carried out.
Press the “<<” cancel
button to cancel the set
operation and go back to
the previous screen.
The “-/+” browser knob has
different uses, depending on the
function chosen:
• To browse menus and
submenus
• To increase/decrease the
indicated values
• To browse cooking functions
• To select the Turbogrill option
(associated with the Grill
function)
To increase/decrease time and
temperature
• To browse memories
The Functions knob is used to select the various oven functions. Each click
of the knob corresponds to a function:
0OFF
Light
Rapid pre-heat
Conventional
Grill/Turbogrill
Forced air
Maxi cooking
Fan
Special functions
Setting
6TH SENSE recipes
Knob -/+
Functions Knob
With the Functions knob turned to “OFF”, if the Display automatically
shows a sequence of screens, Demo mode is activated. In this
condition, the cavity elements are deactivated and cooking cannot be
carried for any function.
To exit the Demo mode and thus restore normal oven operation,
proceed as follows:
1. Disconnect the oven from the mains then reconnect it, and within
60 seconds:
2. turn the Functions knob to the “Lamp” position
3. press the “<<” button,
4. turn the Functions knob to “OFF”,
5. press the “OK” button”.
To enter the Demo sequence, proceed in the same way.
Child Safety with control panel lock
To activate or deactivate the “Child Safety Lock” press the “<<“ and
“OK” buttons at the same time for 5 seconds. If activated, the knobs
and the buttons are locked and the display shows the symbol
Request for confirmation when the settings are changed
If the Functions knob is turned during cooking, the oven requests
confirmation of this choice, so as to avoid accidental changes to the
cooking settings.
If the knob is returned to the original position the display will show the
settings for the cooking in progress.
In any case, the oven continues the cooking until the user confirms the
change in settings.
Automatic switching off device
For safety reasons, the oven switches off automatically (except for the
Special function) after four and a half hours of continuous operation.
To save energy in Stand By mode, press the button “<<“ to
deactivate the display (display in OFF mode). To switch the display
back on, press the “<<“ and “OK” buttons again.
To change a language, proceed as follows:
1. Turn the Function knob to “SETTING”, turn to language and confirm
by pressing the “OK” button
2. Reselect the required language with the “-/+” knob and confirm
by pressing the “OK” button.
Description of control panel
Demo Mode
Safety Features
SETTING (Settings)
Turn the Functions knob to the “Setting” function
The following settings can be accessed and changed:
- Language
- Clock
- Buzzer (enable/disable acoustic signal)
- Contrast (of Display)
- Brightness (of Display)
To restore the original settings, if necessary, turn the Functions knob
to OFF. Then turn the Functions knob to “Setting” and keep the
OK” button pressed for 5 seconds.
Selecting the language
Using the appliance for the first time
When used for the first time, the oven will request the selection of
several options:
Make sure the Functions knob is turned to OFF.
language:
ENGLISH*
FRANCAIS
ITALIANO
ESPAÑOL
POLSKY
Select the required language
with the “-/+” knob.
Press theOK” button to
confirm.
Turn the -/+ knob to adjust the
brightness of the Display.
Confirm with the “OK
button.
Turn the -/+ knob to adjust the
contrast of the Display.
Confirm with the “OK
button.
The hours and minutes can be
set by turning the -/+ knob.
Confirm with the “OK
button.
* factory setting.
Page view 2
1 2 3 4

Comments to this Manuals

No comments