Whirlpool AKZ 801 Manual download pdf (Page 4)

Follow the instructions on the display

The timer can only be used when the oven is not in use and allows a time of up to 3 hours and 59 minutes

to be set.

To set the timer:

1. Keep the Functions knob turned to “OFF”.

2. Press the “OK” button: the “TIMER” flashes on the display.

3. Turn the “-/+” knob to set the required time.

4. Press the “OK” button to confirm the setting.

The timer starts: an acoustic signal and the message “END” on the display indicate when the set time has

elapsed. If the “OK” confirmation button is pressed, the acoustic signal stops and the current time appears

on the display.

The timer can be deactivated at any time by pressing the “<<” button twice.

Selecting the cooking time and cooking end time:

The oven can be programmed for a set cooking time. The maximum programmable cooking time is 3

hours and 59 minutes.

When the oven is on, press the “OK” button to set cooking time. The symbol appears on the display.

Turn the “-/+” knob to display the required cooking time. Confirm with the “OK” button”.

The end of cooking time can now be set.

The symbol appears on pressing the “OK” button. Turn the “-/+” knob to display the required end of

cooking time.

Confirm with the “OK” button.

The oven will automatically calculate the start time so that the food will be ready at the set time.

This function provides for 25 recipes already selected to guarantee best results. Just select the required recipe, and the

oven's advanced electronics will automatically set the function, temperature and adjust the time until cooking is

completed. Every time the oven updates the cooking time, the following message is displayed:

“SENSING”.

Selecting a “6th Sense” recipe:

1) Turn the “Functions” knob to “6th Sense”

2) Turn the “-/+” knob to select the food category from:

Savoury dish

Meat and Fish

Vegetables

Dessert.

Press the “Ok” button to confirm.

3) Turn the “-/+” knob to select the required recipe. Press the “Ok” button to confirm

4) The display will indicate on which level to place the food.

5) Press “Ok” to start cooking.

At the end of cooking, the message “+/- TO ADD TIME” appears.

If extra cooking time is required, turn the “-/+” knob and press the “OK” button to confirm

Some recipes require the food to be mixed or turned about halfway through cooking; the 6TH SENSE function can

estimate the best time for carrying out this operation, indicating it with an acoustic signal.

Important

Only in PIZZA recipes (PIZZA and PIZZA: TWO PIZZAS), the oven will start with an automatic pre-heating function.

An acoustic signal and a message on the display will indicate when to put the pizza in the oven.

To obtain best results, carefully follow the instructions given in the recipe-book supplied.

* The function is disabled if the oven temperature is high. The display will show the message:

OVEN TOO HOT and the oven will automatically start a cooling procedure.

WARM KEEPING* Use this function to keep your food warm after cooking.

The oven will keep the temperature constant at 60°C

The duration can be set in this function.

DOUGH PROVING* This function is used to facilitate dough proving for bread, pizza

and pasta.

The oven will keep the temperature constant at 35°C.

DEFROSTING* To quickly thaw food and bring it to room temperature.

- Leave food in its packaging to prevent it from becoming dry.

CLEANING* This function facilitates cleaning the oven cavity:

- Gradually pour water (up to 250 ml max.) on the bottom of the

oven.

- Select the “Cleaning” function and press the “OK” confirm

button.

- Allow the oven to cool, then clean with a damp sponge.

These functions are only available with the selection of cooking time and/or cooking end time.

Warm Keeping

This function allows a temperature of 60°C to be maintained at the end of cooking.

After setting the cooking time and cooking end time, press the OK button during cooking to select the Warm

Keeping function.

At the end of the required time, turn the Functions knob to OFF to switch the oven off.

Extra browning

This function is used for browning food at the end of cooking.

At the end of cooking the Display will show the message:

COOKING END

-/+ ADD TIME

Two different options can now be set:

Extra cooking time can be added by turning the -/+ knob and confirming with the “OK” button. To access

the EXTRA BROWNING function, press the “OK” button as soon as the Display shows:

COOKING END

-/+ ADD TIME

The display will now show:

EXTRA BROWNING.

Press the “OK” button to confirm.

Special functions

Timer

6TH SENSE recipes

Additional Options with Manual Functions

1 2 3 4

Comments to this Manuals

No comments

Whirlpool AKZ 801 Manual Page 4

Comments to this Manuals

Related products and manuals for Ovens Whirlpool AKZ 801