Whirlpool SX 1049L CX S Instruction for Use download pdf (Page 17)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Side and rear catalytic liners*

These are panels coated with a special enamel, which is

able to absorb the fat released by food as it cooks.

This enamel is quite strong, so that the various accessories

(racks, dripping pans, etc.) can slide along them without

damaging them. White marks may appear on the surfaces;

these are not a cause for concern.

Nevertheless, the following should be avoided:

- scraping the enamel with sharp objects (a knife, for

example);

- using detergents or abrasive materials.

Troubleshooting

Problem Possible cause Solution

A programmed cooking mode

does not start.

There has been a blackout. Reprogram the cooking mode.

The display shows ECO Mode.

The appliance is in standby

mode.

Press any button to exit standby

mode.

An automatic mode has been

selected. “Hot” appears on the

dis

and cookin

does not start.

The temperature inside the oven

is higher than the suggested

value for the selected mode.

Wait for the oven to cool down.

Fan-assisted cooking has been

selected and the food looks

burnt.

Positions 1 and 5: the direct

heat could cause

temperature-sensitive

foods to burn.

We recommend switching

dripping pan positions halfway

through cooking.

1 ... 16 17 18 19 20

No comments

Whirlpool SX 1049L CX S Instruction for Use Page 17