Whirlpool WFI910H0AS Instruction Manual download pdf (Page 7)

3. Determine and mark centerline of the cutout space. The

mounting can be installed on either the left side or right side

of the cutout. Position mounting bracket against the wall in

the cutout so that the V-notch of the bracket is

12⁹⁄₁₆" (31.9 cm) from centerline as shown.

4. Drill two ¹⁄₈" (3 mm) holes that correspond to the bracket

holes of the determined mounting method. See the following

illustrations.

Floor Mounting

Wall Mounting

5. Using the Phillips screwdriver, mount anti-tip bracket to the

wall or floor with the two #12 x 1⁵⁄₈" screws provided.

6. Move range close enough to opening to allow for final

electrical connections. Remove shipping base, cardboard or

hardboard from under range.

7. Move range into its final location, making sure rear leveling

leg slides into anti-tip bracket.

8. Move range forward onto shipping base, cardboard or

hardboard to continue installing the range using the following

installation instructions.

A. 12

⁹⁄₁₆

" (31.9 cm)

B. Bracket V-notch

Rear position Front position Diagonal (2 options)

Centerline

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Whirlpool WFI910H0AS Instruction Manual Page 7