Whirlpool 1187680-W Use and Care Guide download pdf (Page 10)

To turn the air conditioner on or off:

Press POWER.

To raise the temperature:

Press the TEMP plus pad to raise the temperature 1º until it

reaches 88ºF (31ºC).

To lower the temperature:

Press the TEMP minus pad to lower the temperature 1º until it

reaches 66ºF (19ºC).

To select the mode:

Press MODE.

NOTE: Mode works the same as the air conditioner touch pad

control.

To select the fan speed:

Press FAN SPEED.

NOTE: Fan Speed works the same as the air conditioner touch

pad control.

To set Timer for a 1- to 24-hour delay before air conditioner

turns on (air conditioner must be Off):

1. Press TIMER.

2. Press the plus or minus pad to change the delay time from

1 to 24 hours.

To set Timer for a 1- to 24-hour delay before air conditioner

turns off (air conditioner must be On):

1. Press TIMER.

2. Press the plus or minus pad to change delay time from 1 to

24 hours.

Changing Air Direction

Use the tabs to direct the air up, down, right, left or straight

ahead.

Normal Sounds

When your air conditioner is operating normally, you may hear

sounds such as:

■ Droplets of water hitting the condenser, causing a pinging or

clicking sound. The water droplets help cool the condenser.

■ Air movement from the fan.

■ Clicks from the thermostat cycle.

■ Vibrations or noise due to poor wall or window construction.

■ A high-pitched hum or pulsating noise caused by the modern

high-efficiency compressor cycling on and off.

A. Right or left directional tabs

B. Up or down directional tabs

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

Whirlpool 1187680-W Use and Care Guide Page 10