Whirlpool W10385093A - SP Use and Care Guide download pdf (Page 14)

SPECIAL INSTRUCTIONS

FOR STEAM MODELS

Water Inlet Hose

Replace inlet hose and hose screen after 5 years of use

to reduce the risk of hose failure. Periodically inspect and

replace inlet hose if bulges, kinks, cuts, wear, or leaks

are found.

When replacing your inlet hose, record the date

of replacement.

To Winterize the Dryer

1. Unplug dryer or disconnect power.

2. Shut off water faucet.

3. Disconnect water inlet hose from faucet and drain.

To Use the Dryer Again

1. Flush water pipes. Reconnect water inlet hose to faucet.

Turn on water faucet.

2. Plug in dryer or reconnect power as described in the

“Installation Instructions.”

CHANGING THE DRUM LIGHT

The dryer light automatically turns on inside the dryer drum

when you open the door.

To change the drum light:

1. Unplug dryer or disconnect power.

2. Open the dryer door. Locate the light

bulb cover on the back wall of the dryer.

Remove the screw located in the lower

right corner of the cover. Remove the

cover.

3. Turn bulb counterclockwise. Replace

the bulb with a 10-watt appliance bulb only.

Replace the cover and secure with the screw.

4. Plug in dryer or reconnect power.

1 ... 13 14 15 16 17 18 19 20

No comments

Whirlpool W10385093A - SP Use and Care Guide Page 14