Whirlpool AMD 323 Instruction for Use download pdf (Page 22)

Piping Connection:

a. Connect indoor unit pipes with two wrenches. Pay

special attention to the torque allowed as shown

below to prevent the pipes, connectors and flare

nuts from being deformed and damaged.

b. At first fingers-tighten them, then use the wrenches.

4. Connecting the Cable

• Indoor Unit

Connect the power connecting cord to the indoor

unit by connecting the wires to the terminals on the

control board individually in accordance with the

outdoor unit connection.

NOTE: (depending on the model)

It is necessary to remove the cabinet to perform

connections with the indoor unit terminal.

• Outdoor Unit

1) Remove the access door from the unit by

loosening the screw. Connect the wires to the

terminals on the control board individually as

follows.

2) Secure the power connecting cord on the control

board with cable clamp.

3) Refit the access door in the original position and

tighten the screw.

4) Use a recognized circuit breaker for 24K model

between the power source and the unit. A

disconnecting device to adequately disconnect all

supply lines must be fitted.

Model Pipe size Torque Nut width Min. thickness

7,9,12,18K Liquid Side (1/4 inch) 1.8kg.m 17mm 0.6mm

24K Liquid Side (3/8 inch) 3.5kg.m 22mm 0.6mm

7,9K Gas Side (3/8 inch) 3.5kg.m 22mm 0.6mm

12,18K Gas Side (1/2 inch) 5.5kg.m 24mm 0.6mm

24k Gas Side (5/8 inch) 7.8kg.m 27mm 0.6mm

Indoor unit

Outdoor unit

Front panel

Terminal (inside)

Cabinet

Chassis

Access door

Te r m i n a l

(inside)

501932602024:Layout 1 28-11-2008 9:22 Pagina 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Comments to this Manuals

No comments

Whirlpool AMD 323 Instruction for Use Page 22

Comments to this Manuals

Related products and manuals for Vacuum cleaners Whirlpool AMD 323