Whirlpool AMD 350 Instruction for Use download pdf (Page 14)

CHILD LOCK function

Press and buttons simultaneously to lock or

unlock the buttons of remote control.

If the remote control is locked, icon will be

displayed, and no functions can be activated by

pressing buttons.

Press and buttons simultaneously again to

unlock it.

Switch between °C and °F

After pressing button to turn off the appliance,

you can press MODE and buttons

simultaneously to switch between °C and °F.

Note: this function is only available when the

product is off. Front panel temperature display will

change accordingly when turning on the appliance.

Factory setting is based on °C

EMERGENCY OPERATION

Under emergency situation or when remote

control is missing, you can control the unit by

pressing the on/off swith located on the indoor

unit.

• Turn on the appliance: when the unit is off, press

this button, it will start up and operate in 6th

SENSE mode.

• Turn off the appliance: when the unit is on, press

this button, the unit will stop working.

on/off switch

PROTECTION

Operating condition

The protective device maybe trip and stop the

appliance in the cases listed below.

Noise pollution

• Install the appliance at a place that can bear its

weight in order to operate more quietly

• Install the outdoor unit at a place where the air

discharged and the operation noise would not

disturb your neighbours.

• Do not place any obstacles in front of the air

outlet of the outdoor unit lest it increases the

noise level.

Features of protection device

Wait at least 3 minutes before restarting the unit

after operation stops or changing mode during

operation. After connecting to power supply and

turning on the appliance immediately, a delay of 20

seconds may occur before it starts to operate. If all

operation has stopped, press ON/OFF button

again to restart. Timer should be set again if it has

been cancelled.

Features of COOLING mode

Anti-freezing

When the temperature of the indoor heat

exchanger drops to 0° or below, compressor will

stop working to protect the appliance.

Features of HEATING mode

Preheating

In order to prevent cool air blowing, 2-5 minutes

are necessary to preheat the indoor unit at

HEATING operation start. The indoor fan will not

work during preheating.

Defrosting

In HEATING operation the appliance will defrost

(de-ice) automatically to raise efficiency. This

procedure usually lasts 6-10 minutes. During

defrosting, fan stops running and "H1" will display

on front panel.

After defrosting is completeed, it returns to

HEATING mode automatically.

Heating

Outdoor air temperature is over 24°C

Outdoor air temperature is below -7°C

Room temperature is over 27°C

Cooling

Outdoor air temperature is over *43°C

Room temperature is below 21°C

Dehumidifying

Room temperature is below 18°C

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments

Whirlpool AMD 350 Instruction for Use Page 14

Comments to this Manuals

Related products and manuals for Vacuum cleaners Whirlpool AMD 350