Whirlpool SL B22 AA0 Instruction for Use download pdf (Page 20)

hotpoint.eu

special guides in the dust compartment.

14. Fit the Pure Clean dust bag using the special

dust bag support.

The appliance is equipped with a safety

device that prevents the dust-

compartment lid from closing unless the dust

bag has been correctly installed. Do not force

the dust bag lid to close and make sure all the

parts are in the correct position to allow you to

close the lid.

15. Close the dust compartment lid until it clicks

into place.

Cleaning the dust container (I)

model without dust bag

For the routine cleaning of the dust container:

1. Press the dust-compartment opening button

(13) to open the dust compartment (14) and

remove the dust container (39).

2. Open the lid and empty the dust container.

3. Remove any residual dirt by washing the

dust container under running water.

4. Let it dry at room temperature until all its

parts are thoroughly dry.

5. Close the dust container lid until it clicks

into place and replace it into the dust

compartment.

6. Close the dust compartment lid until it clicks

into place.



model without dust bag

This model comprises two Pure Clean Hepa 13

lters. The Pure Clean Hepa 13 lter ensures

maximum protection against allergens and

high air quality, because the air given back by

the appliance is entirely free from dust/powder

residues (ltering power > 99.95 %).

       

      

power. In any case we recommend replacing the

       

performance.

To clean the Pure Clean Hepa 13 lter (30) in the

back:

1. Disassemble the air grill (31) using the

opening tab.

2. Remove the Pure Clean Hepa 13 lter by



model with dust bag

The Pure Clean Hepa 13 lter ensures

maximum protection against allergens and

maintains high air quality, as the air given back

by the appliance is entirely free from dust/

powder residues (ltering power > 99.95 %).



      

power. In any case we recommend replacing

       

maximum performance.

To clean the Pure Clean Hepa 13 lter (30):

1. Disassemble the air grill (31) using the

opening tab.

2. Remove the Pure Clean Hepa 13 lter by

releasing the opening tab.

3. Wash the lter under running water, taking

care that the jet of water is not too strong.

4. Hold it so that the water ows parallel to its

folds.

5. Let it dry at room temperature until all its

parts are thoroughly dry.

6. Replace the Pure Clean Hepa 13 lter,

paying attention to the position of the

notches.

7. Fit the air grill into its housing until it clicks

into place.

To clean the dust compartment lters (38):

8. Press the dust-compartment opening button

(13) to open the dust compartment lid (14).

9. Remove the Pure Clean dust bag (34), motor

lter grill (36) and motor lter (35) from the

motor lter grill.

10. Clean the motor lter by washing it under

running water, taking care that the jet of

water is not too strong. Then gently shake

water loose.

11. When cleaning the motor lter grill, remove

any dust/powder residues with a small brush.

If needed, use a damp soft cloth.

Make sure all its parts are thoroughly

dry before replacing them.

12. Fit the motor lter into the motor lter grill

again, taking care to position it gently into

the special notches.

13. Slide the motor lter grill assembly into the

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 85 86

Whirlpool SL B22 AA0 Instruction for Use Page 20

Comments to this Manuals

Whirlpool SL B22 AA0 Instruction for Use Page 20

Comments to this Manuals

Related products and manuals for Vacuum cleaners Whirlpool SL B22 AA0