6* Remove the Blower Housing.
7. Remove the Drive Belt.
8. Remove the Motor Wiring. (Fig. 26)
9. Remove the wiring to the broken belt switch.
10. Remove four (4) motor bracket retaining screws
and remove the motor.
Motor
Wiring
Dryer Heater Element Access
1. Remove the Dryer Toe Panel.
2. Remove the Lint Screen and the Lint Duct Assem
bly and Transition Duct.
3. Remove the Heater Element Shield screws and re
move the shield.
4. Remove the one (1) Heater Element retaining screw
to remove the Heater Element. (Fig. 28)
Fig. 28
12
Comments to this Manuals