Whirlpool AWO/C 6304 Instruction for Use download pdf (Page 2)

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

without “Rapid”

Approx. programme duration

(hours : minutes)

without “Rapid” with “Rapid”

Mixed

40 4.0 48 0.50 1:00 -

Cotton

95 6.0 60** 1.90 2:30 -

Cotton

60 6.0 50 0.80 2:20 1:35

Cotton

40 6.0 59 0.60 2:05 1:15

Synthetics

40 3.0 42 0.50 1:20 0:55

Delicates

30 1.5 60 0.40 0:46 -

Wool/ Handwash

40 1.0 47 0.50 0:40 -

White

40 6.0 59 0.70 2:20 -

Light colours

40 4.0 60 0.45 1:20 -

Dark

40 4.0 40 0.53 1:40 1:15

Cotton *

60 6.0 44 0.69 4:00 -

Cotton *

60 3.0 34 0.50 2:30 *** -

Cotton *

40 3.0 34 0.45 2:30 -

Speed 15´

30 3.0 20 0.13 0:15 -

Whirlpool is a registered trademark of Whirlpool USA.

5019 300 00007

SELECT ANY DESIRED OPTION

When the combination of programme and additional

option(s) is not possible, the indication switch off

automatically. Unsuitable combinations of options are

deselected automatically.

“Prewash” button

• Adds a prewash cycle to the wash programme selected;

prolongs the programme by about a quarter of an hour.

• Recommended for heavily soiled laundry (e.g. with sand

or granular dirt).

• Do not use liquid detergent for the main wash when

activating the “Prewash” option.

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for only lightly soiled laundry.

• Not selectable for Cotton 70 - 95°C.

“Clean+” button

• Choose this option if you use an in-wash additive for

stain removal (powder, for example “Vanish”) - it will

optimize the additive’s efficiency to get better wash

performance and stain removal.

• Use with maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together

with your detergent (only use powder detergent with this

option). Respect the manufacturer’s dosing instructions.

• May prolongs the programme by up to 15 minutes

• Appropriate for use of stain removers and bleaches

on oxygen basis. Chlorine or perborate bleaches

must not be used!

“Colours 15°” button

• Saves energy used for water heating while maintaining a

good wash result.

• Supports colour maintenance when washing coloured

laundry.

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures (15 or 20°C).

• Not selectable for Cotton 70 - 95°C.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

water, washing baby linen and helps people with allergies.

“Easy ironing” button

• Reduces creasing by an increased water quantity and

a very gentle spin.

“Rinse hold” button

• The laundry remains in the last rinse water without

pregressing to the final spin cycle to avoid creasing and

prevent colours from changing.

• It is particularly useful if you want to postpone spinning to

a later time, or if you want to drain only.

• The wash programme stops to “Rinse hold” when the

“Rinse hold” indicator on the display blinks. The “Start/

Pause” indicator blinks as well.

- the sensor technology adapts water, energy and programme duration to the size of your wash load.

Before starting and after end of a programme, the lamp

lights to show the the door can be opened. As long as a wash

programme is running, the door remains locked and must on

no account be forced open. In case you have an urgent need

to open it during a running programme, refer to “Reset” a

running programme before the end”.

Open the tap and press the “Start/Pause” button .

The indicator next to the “Start/Pause” button lights up.

When the laundry load is detected or the programme

duration is updated, the display shows an animation.

FAILURE INDICATION

The “Door open” indicator lights up, and the display shows

“End”.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme.

The light blinks.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the “Start/Pause” button again.

The new programme continues at the same position

where the previous programme was interrupted.

Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME

BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few seconds;

an animation appears on the display. The water is drained

out; it may last some time until you can open the door.

With this function you can postpone your programme to

complete at a later time: press the button to select in how

many hours the programme shall be finished. Thus, it allows

you to have your laundry ready at a particular time and to

profit from more favorable energy rates during the night, for

example.

• The time until the “Cycle end” can be selected in full

hour time segments (1 to 24 h). When you press the

button, the shortest possible time will be displayed; keep

on pressing the button to loop through all the available

times. To remove it again, keep on pressing the button

until you see the value “0:00”.

• When you have selected the desired time until the “Cycle

end”, press “Start/Pause” - the countdown will begin.

• During the countdown, you can still modify the

programme setting (select or deselect options, change

spin speed etc.). If the modifications prolong the

programme duration so that it overruns the originally set

time until the “Cycle end”, the programme will start

immediately.

• Sometimes the programme may finish before the

selected time until the “Cycle end” has expired (e.g. for

small loads). In this case, the washing machine will tumble

the laundry regularly to keep it fresh, until the selected

“Cycle end” time has expired. During tumbling, the

display will show an animation. The tumbling phase can

be stopped at any time either by pressing any button or

by rotating the programme selector; the animation will

stop and the door will unlock in about 1 minute as

indicated on the display.

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”: no or not sufficient inlet water

”Service”: failure or malfunction of an electrical

component

”Clean pump”: waste water is not pumped out.

Spin speed on display blinks: unbalance during spinning.

The „Eco monitor“ gives you a rough feedback about the

power consumption of the programme setting you selected.

As soon as you turn the programme selector to any progra-

mme, the „Eco monitor“ is on.

less more

The indicator on the left is to show that the „Eco monitor“ is

active. The four indicators next to it show the degree of

consumption: the less power your programme setting is

forecasted to consume, the less indicators will light up. This

depends on the programme, temperature and options selec-

ted, and also on the size of the wash load. For that reason,

the forecasted degree of power consumption may adapt

when the washing machine detects the wash load.

PROGRAMME END

ECO MONITOR

SET CYCLE END

PROGRAMME START

“DOOR OPEN” INDICATION

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the programme will

terminate automatically with the final spin cycle for the

present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain” programme

and press the “Start/Pause” button.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set different spin speed.

• If spin speed “0” is selected, the final spinning is cancelled

but intermediate spin peaks remain during rinse.

The water is drained out only.

CONSUMPTION DATA

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply

pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill

valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by

reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with

temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting

Guide” in your Instructions for Use).

* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

*** Automatic adaptation of programme duration after detection of wash load

Power consumption in off-mode 0.11 W / in left-on mode 2.32 W

Load the laundry, close the door and turn the programme

selector to the desired programme; the “Start/Pause”

indicator blinks.

The spin speed shown on the display can be altered by

pressing the “Spin” button .

LOAD LAUNDRY, ADD DETERGENTS

AND SELECT THE PROGRAMME