Whirlpool FP 1009 AX0 UK Instruction for Use Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
8 9
enen
hotpoint.co.uk
these directions can result in damage to the
blades, jug, blender, and possibly result in
personal injury.
USE THE MILLING CUP
ATTACHMENT (G)
Use the milling cup for herbs, nuts and coffee
beans.
1. To open the cup, screw counter-clockwise the
blade unit (yy).
2. Put your ingredients into the jug (xx). Fill it no
more than half full.
3. Screw the blade unit onto the jug clockwise,
untilitisngertight.
4. Place the milling cup onto the power unit and
turn to lock.
5. Switch on to maximum speed or use the
pulse control.
Safety
• Nevertthebladeunittoyourmachinewith-
outthejugtted.
• Never unscrew the jug while the mini chop-
per/millisttedtoyour
• machine.
• Don’t touch the sharp blades. Keep the blade
unit away from
• children.
• Never remove the mini chopper/mill until the
blades have
• completely stopped.
Important
• To ensure long life of your mini chopper/mill,
never run for longer than 30 seconds.
• Switch off as soon as you’ve got the right
• consistency.
• Use for dry ingredients only.
Tips and Techniques
• Herbs are best milled when clean and dry.
CARE AND CLEANING
Please read “Important information and
safeguards” paragraph before using.
1. Before cleaning, be sure the unit is switched
off and the cord is unplugged.
2. Whenever possible, rinse parts immediately
after processing for easy cleanup.
3. Wipe the Base, Control knob, and feet with
a damp cloth and dry immediately and thor-
oughly. Stubborn spots can be removed by
rubbing with a damp cloth and a mild, non-
abrasive cleaner. Do not immerse the Base
in liquid.
4. All removable parts can be washed in hot,
sudsy water; after washing rinse, and dry
thoroughly. If necessary, use a small nylon
bristle brush to thoroughly clean the Bowl and
Food Chute/Cover, this type of brush will also
help prevent cutting yourself on the Chopping
Blade , Slice/Shred Disc and blender Blade.
5. Do not use abrasive pads or cleansers on any
plastic or metal parts.
6. DonotlltheBowlwithboilingwaterorplace
any of the parts in boiling water.
Tips and Techniques
Some foods, such as carrots, may temporarily
stain the Bowl. To remove stains, make a paste of
1 tablespoon of baking soda and two tablespoons
of warm water. Apply the paste to the stains and
rub with a cloth. Rinse in sudsy water and dry.
Tocleanbowls,llthedirtybowlhalfwaywithhot
water ad add a couple of drops of liquid dish soap.
Withthetoprmlyinplace,turntheknobtohigh
speed for about 30 seconds. Most of the debris
pour right out with the soapy water, and the bowl
need only to be rinsed or washed lightly by hand.
pusher. Cut beforehand if necessary.
7. Afterprocessing,settherotaryswitchbriey
to high speed and leave the appliance run-
ning until all the fruit pulp has been squeezed
out.
Maximum processing quantity: 250g
fruit or vegetables.
USE THE CITRUS PRESS
ATTACHMENT (E)
Please read “Important information and
safeguards” paragraph before using.
Be sure the unit is OFF and the cord is
unplugged before use.
The pressure cone can not be removed from
the juice.
Halve the food/fruit in advance.
Let unit do the work, heavy pressure will not
speed operation. Do not use the processor
continuously for more than 30 minutes at a
time, allow a rest period of 1 minute between
working cycles.
1. PlacetheBowlontotheBaseatrst.
2. Ensure the Drive shaft is placed in position.
3. Screw on the Citrus Press as far as possible
in an anticlockwise direction.
4. To extract juice from the fruit, set the rotary
switch to low speed and press the fruit onto
the pressing zone.
Do not exceed the max liquid level in
the bowl. Empty the bowl soon.
USE THE BLENDER
ATTACHMENT (F)
Please read “Important information and
safeguards” paragraph before using.
Before rst use, wash all parts except
the unit base: the Measuring cup, lid,
jug assembly (the jug assembly includes jug,
blade assembly, gasket and jug base). The
jug assembly is non- decomposable.
Blades are sharp. Handle carefully. Never
place blender motor base in water or other
liquids.
1. PlacethejugassemblyontotheBaseatrst.
Put down the jug assembly until it is correctly
placed on the Base, snap the jug assembly
handle and rotate it anticlockwise until it is
fully locked on the Base.
2. Place the food to be blended into the jug.
3. Put the lid on the jug and rotate it anticlock-
wise till lock position. Be sure the measuring
cup is in place.
4. Ensure the knob is on “OFF”. Plug the cord
into a standard electrical outlet.
5. For best results when crushing ice, use
“PULSE”. To activate it, rotate it anticlockwise
until it is on “PULSE”; to stop crushing, re-
lease the knob.
6. If you want to add ingredients while the blend-
er is on, remove the measuring cup and feed
through the lid opening.
7. Whennishedblending,rotatetheknobuntil
it is on the “OFF” position.
There is only one position for the jug
assembly to be locked onto the Base.
The unit won’t operate if the jug assembly is
not correctly placed onto the Base.
Tips and Techniques
• Blender may be damaged. Do not process
deep-frozen ingredients (except ice cubes).
Do not operate when empty.
• Cut food into small pieces, about 2 in. (5 cm)
before adding to the blender. To chop, grate
or prepare fruit smoothies using fresh or fro-
zen fruit, cut foods into 3/4 in. (2 cm.) pieces.
• For best circulation of foods that are to be
blended with some liquid, pour the liquid into
thejugrst,thenaddsolids.
• Following items should never be placed in the
unit as they may cause damage: bones, large
pieces of solid frozen foods, or tough foods
such as turnips.
• Tocrushice,llblenderjughalf-fullwithcold
water. Add about 2 cups of ice cubes. Hold
onehandrmlyonthelidandrotatetheknob
on pulse position. If more ice is needed, re-
move the cap and add cubes one by one
through the hole in the lid. DO NOT CRUSH
ICE WITHOUT LIQUID. Failure to follow
Page view 4
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments