Whirlpool Dishwashers Specifications Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
7
Sensing/Soaking
The dishwasher senses the soil level on the dishes. Soil level determines the length of some cycles,
the amount of heat added to the wash and the number of rinses needed in the cycle for the load. It also
senses the temperature of the water during thermal hold water heating periods. SENSING/SOAKING
glows during the soil sensing and thermal hold portions of the cycle. Wash action continues while
sensing occurs. SENSING/SOAKING also glows during “soaking” events and the 4-hour pre-soak
cycle invoked by the Soak & Scour Option.
Sanitized
If the Sani Rinse option is selected, SANITIZED glows when the Sani Rinse cycle is finished. If the
dishwasher did not properly sanitize the dishes, the light flashes at the end of the cycle. This can
happen if the cycle is interrupted or the dishwasher failed to reach sani temperatures. The light goes
off when any key is selected or the door is opened and reclosed.
Clean
CLEAN glows when a cycle is finished. The light turns off when the door is opened and reclosed or any
key is pressed.
CONTROL PANEL
MODEL: GU1500XTK
CYCLE SELECTION CHART
Select the wash cycle and options desired. Upon selecting the cycle key, the cycle will begin immedi-
ately. Cycles may be changed at any time, during the first fill. Options can be selected or changed at
any time.
NOTE: The last options used will be recalled from memory automatically upon selecting a cycle, (if
the option is valid with the cycle selected).
A “ ” shows what steps are in each cycle.
Temperatures indicate where extra heat is added.
Water usage is shown in U.S. gallons/liters.
Cycle time includes dry time. An asterisk (*) by the cycle time indicates the cycle time might be longer
depending on the temperature of the water entering the dishwasher. The cooler the water, the longer
the cycle time. If the water is already hot enough, the cycle time will be as shown.
CYCLES
OPTIONS
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

Comments to this Manuals

No comments