20
With the edge with 2 notches at the top, align the notches
on the outer window assembly with the tabs on the trim ring
and lower into place as shown in gure A. Rotate the outer
window assembly counterclockwise to lock tabs into place
(gure B). Using a Phillips screwdriver, secure with 2 screws
removed earlier.
IMPORTANT: Do not overtighten.
6. Rotate and reassemble outer window
assembly to trim ring
Fig. A
Fig. B
Bottom
of door
Notches
7. Remove hinge and latch
Using a T25
®
screwdriver, remove the 3 screws securing the
latch plate and latch backing plate and the 5 screws holding
the hinge assembly in place.
Hinge
Latch
5. Reverse outer window assembly
Using a Phillips screwdriver, remove the 4 screws from the
outer window retainer and lift off the trim ring off the window
(A). Rotate trim ring 180° and secure with the 4 screws
removed earlier (B).
Handle
Fig. A
Fig. B
Handle
Comments to this Manuals