Whirlpool 2225405 Specifications download pdf (Page 10)

Foryourconvenience,yourrefrigeratorcontrol(s)arepresetatthe

factory.Whenyoufirstinstallyourrefrigerator,makesurethatthe

control(s)arestillpresettothemid-settingsasshown.

NOTE:Toturnyourrefrigeratoroff,turntherefrigeratorcontrolto

thewordOFForuntilthewordOFFappears.Yourproductwill

notcoolwhentherefrigeratorcontrolissettoOFE

Mid-setting "3"

OFF

COLDESG

5 1

NO{3MAL

Mid-setting "4"

IMPORTANT:

• Give your refrigerator time to cool down completely before

adding food. It is best to wait 24 hours before you put food

into the refrigerator.

If you add food before the refrigerator has cooled completely,

your food may spoil. Adjusting the Refrigerator and Freezer

Controls to a higher (colder) than recommended setting will

not cool the compartments any faster.

Adjusting Controls

The mid-setting(s) indicated in the previous section should be

correct for normal household usage. The controls are set

correctly when milk or juice is as cold as you like and when ice

cream is firm.

If the temperature is too warm or too cold in the refrigerator or

freezer, first check the air vents to be sure they are not blocked.

If you need to adjust temperatures, use the settings listed in the

chart below as a guide. On models with two controls, adjust the

refrigerator temperature first. Wait at least 24 hours between

adjustments and then recheck the temperatures.

CONDITION/REASON: ADJUSTMENT:

REFRIGERATOR section too Adjust REFRIGERATOR

warm or TEMPERATURE

• Door opened often, large Control one setting

amount of food added or room higher

temperature very warm

CONDITION/REASON: ADJUSTMENT:

FREEZER section too warm/ice Adjust FREEZER or

not made fast enough TEMPERATURE Control

• Door opened often, or large one setting higher

amount of food added or very

cold room temperature (can't

cycle often enough)

• Heavy ice usage

REFRIGERATOR section

too cold

• Controls not set correctly for

your conditions

Adjust REFRIGERATOR

or TEMPERATURE

Control one setting

lower

FREEZER section too cold

• Controls not set correctly for

your conditions

Adjust FREEZER or

TEMPERATURE Control

one setting lower

Turning the ice maker o_/off

NOTE: Do not force the wire shutoff arm up or down.

• To turn the ice maker on, simply lower the wire shutoff arm.

NOTE: Your ice maker has an automatic shutoff. As ice is

made, the ice cubes will fill the ice storage bin and the ice

cubes will raise the wire shutoff arm to the OFF (arm up)

position.

• To manually turn the ice maker off, lift the wire shutoff arm to

the OFF (arm up) position and listen for the click to make sure

the ice maker will not continue to operate.

Increasing ice production rate

NORMAL Ice Production: In Normal ice production mode, the

ice maker should produce approximately 8 to 12 batches of

ice in a 24-hour period. If ice is not being made fast enough,

turn the Freezer Control toward a higher (colder) number in

half number steps. (For example, if the control is at 3, move it

to between 3 and 4.) Wait 24 hours and, if necessary,

gradually turn the Freezer Control to the highest setting,

waiting 24 hours between each increase.

MAXIMUM Ice Production (on some models): In Maximum ice

production, the ice maker should produce approximately 16

to 20 batches of ice in a 24-hour period. If your refrigerator

has the maximum ice production feature, push the switch to

MAX.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Whirlpool 2225405 Specifications Page 10

Comments to this Manuals

Related products and manuals for Fridges Whirlpool 2225405