Whirlpool 2314473B Use and Care Guide download pdf (Page 14)

f. Press up on the dispenser paddle, as shown, to release.

2. Pull down on the dispenser paddle to remove.

NIGHT LIGHT: Press the light bulb button a second time to select

the night light mode. The green indicator will appear below NIGHT

LIGHT. The dispenser light will automatically adjust to become

brighter as the room brightens, dimmer as the room darkens.

OFF: Press the light bulb button a third time to turn the dispenser

light off.

The Dispenser Lock

The watar dispenser can be locked for easy cleaning or to prevent

unintentional dispensing by small children and pets.

NOTE: The lock feature does not shut off power to the product, to

the ice maker, or to the dispenser light. It simply deactivates the

dispenser paddle.

To Lock the Dispenser:

Press and hold the LOCK OUT button for 2 seconds until the red

indicator appears. The water dispenser and the dispenser control

panel will not work.

To Unlock the Dispenser:

Press and hold the LOCK OUT button for 2 seconds until the

indicator disappears. Then continue to dispense water as usual.

3. Replace the dispenser paddle by firmly snapping it into the

dispenser cover as shown.

The Dispenser Light

The dispenser light turns on automatically when you press the

paddle to dispense water. If you want the light to be on

continuously, press the light bulb button, located on the left-hand

side of the dispenser control panel, for either ON or NIGHT LIGHT.

NOTE: The dispenser lights are LEDs which do not need to be

changed.

NI_H_

• ®

t/G£1

ON: Press the light bulb button once to turn on the dispenser

light. The green indicator will appear below ON.

LOCKOUT

NOTE: Do not use with water that is microbiologically unsafe

or of unknown quality without adequate disinfection before or

after the system. Systems certified for cyst reduction may be

used on disinfected waters that may contain filterable cysts.

Water Filter Status Light (on some models)

The water filter status light will help you know when to change

your water filter. The light will change from green to yellow. This

tells you that it is almost time to change the filter. It is

recommended that you replace the water filter when the status

light changes to red OR water flow to your watar dispenser or ice

maker decreases noticeably.

After changing the water filter, reset the water filter status light.

The status light will change from red to green when the system is

reset.

Non-indicator Water Filter (on some models)

If your refrigerator does not have the status light, you should

change the water filter every 6 to 9 months depending upon your

usage. If the water flow to the water dispenser or ice maker

decreases noticeably before 6 months have passed, replace the

water filter more often.

Using the Dispenser Without _ Water Filter

You can run the dispenser without a watar Jilter. Your watar will not

be filtered.

f, Remove the water tiger.

2, Slide the cap off the end of the filter and replace the cap in the

base grille.

IMPORTANT: Do not discard the cap. It is part of your

refrigerator. Keep the cap to use with the replacement filter.

3, Rotate the cap until it is securely in posgion.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

Comments to this Manuals

No comments

Whirlpool 2314473B Use and Care Guide Page 14

Comments to this Manuals

Related products and manuals for Fridges Whirlpool 2314473B