Whirlpool ET18NKXDG01 Specifications download pdf (Page 13)

Using the ice cube trays

If cubes are not used, they may shrink. The

moving cold air starts a slow evaporation.

The longer you store cubes, the smaller

they get.

To remove ice:

1. Hold tray at both ends.

2. Twist slightly.

Using the optional au

to

Imatic ice maker

If your refrigerator has an automatic ice

maker, or if you plan to add one later

(contact the dealer for ice maker kit num-

ber), here are a few things you will want

to know.

l The ON/OFF lever is a wire signal arm.

DOWN to make ice automatically

UP to shut off the ice maker

IMPORTANT:

Do not turn on the ice

maker until it is connected to the water

supply. Instructions for ice maker water

supply hookup are attached to the back

of the refrigerator cabinet.

l The dial or lever on the side of the ice

maker changes the size of the cubes.

l You may hear water running when the

ice maker is working. You’ll hear ice falling

into the bin. Don’t let these sounds

bother you.

l If you remove the ice bin, raise the signal

arm to shut off the ice maker. When you

replace the bin, push it in all the way and

lower the ice maker signal arm to the ON

position.

l Good water quality is important for good

ice quality. Try to avoid connecting the ice

maker to a softened water supply. Water

softener chemicals (such as salt from a

malfunctioning softener) can damage the

ice maker mold and lead to poor ice

quality. If a softened water supply cannot

be avoided, make sure the water softener

is operating properly and well maintained.

UP

to

stop

ice maker.

DOWN

to start

ice maker.

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Comments to this Manuals

No comments