Whirlpool ET20NK Specifications download pdf (Page 7)

Changing the light bulbs...

Reach behind the control console to find bulbs.

2. Remove bulb.

3. Replace with a 40.watt appliance bulb.

Removing the base grille...

To remove the grille:

METAL CLIPS

1. Open the door

To replace the grille:

2. Pull grille outwards as shown.

Line up grille support tabs with metal clips.

Do not remove Tech Sheet

fastened behinc!

2. Push firmly to snap into place.

grille.

Close the door.

Ice cube trays...

It cubes are not used.they may shrink The mov-

1’19 cold air starts a slow evaporation. The longer

c.Abes are stored, the smaller they get.

To remove ice:

Hold tray at both ends.

2. Slightly twist.

Optional automatic ice maker...

It you have the automatic ice maker accessory,

GI If you plan to add one luter (Part No ECKMF-83)

there are a few things you will want to know

* The ON/OFF lever is a wire signal arm

Down...for making Ice automatically

lip...to shut off the Ice maker.

DO NOT TURN ICE MAKER ON UNTIL IT IS CON-

NECTED TO THE WATER SUPPLY.

* !ne dial or lever on the side of the Ice maker

changes the size ot the cubes.

* Shakethe bin occasionally to keep cubes sepa-

r.lted,and toobtain Increased storage capacity

It IS normal for Ice crescents to be attached by a

~rner They will break apart easily

p-c-,

Off

LOWER SIGNAL

ARM TO START IT

RAISE SIGNAL

ARM TO STOP ICE

vOCr

will hear water running when Ice maker IS

tiorking You I heo: Ice fall lntn the b,r- Don’t ie!

‘.“.;e s(-,J7(-4: *, -+c. .P ‘_

The Ice maker WIII not operate until the freezer

1s cold enough to make ice. This can take

overnight.

* Because of new plumbing connections, the first

Ice may be discolored or off-flavored. Discard

the first few batches of ice.

If ice is not being made fast enough and more

(ce

needed, turn the Refrigerator Control to-

tiard a higher number. Wait a day and, if neces-

sary, turn the Freezer Control toward A

If you remove the ice bin, raise the signal arm to

shut off the ice maker. When you return the bin,

push it all the way in and lower the arm to the ON

posltion.

If cubes are stored too long, they may develop

an off-flavor ..like stale water. Throw them away.

They will be replaced. Cubes in the ice bin can

nls~ become smaller by evaporation

Good water quality is important for good ice

quality It IS not recommended that the ice maker

be connected to a softened water supply. Water

boftener chemicals such as salt from a malfunc-

+loning softener can damage the ice maker

mold and lead to poor quality ice. If a softened

water supply cannot be avoided, then it is impor-

-ail+ that the water softener be well maintained

operr!ting properI\

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Whirlpool ET20NK Specifications Page 7

Comments to this Manuals

Related products and manuals for Fridges Whirlpool ET20NK