Whirlpool WRT371SZBM User's Guide download pdf (Page 8)

9. Remove the door stop from the bottom of the freezer door.

10. Move the door stop to the opposite side making sure that the

hole in the door stop plate is aligned perfectly with the hole for

the center hinge pin.

11. Using the screw removed in Step 9, fasten the door stop to

the bottom of the freezer door.

12. Tighten all screws. Set aside the freezer door until the hinges

and refrigerator door are in place.

Reverse Refrigerator Door

1. Remove the door stop from the bottom of the refrigerator

door.

2. Replace the door stop on the opposite side of the refrigerator

door, making sure that the hole in the door stop plate is

aligned perfectly with the hole for the bottom hinge pin.

3. Fasten the door stop to the door.

4. Remove the screws from the top of the refrigerator door

handle.

5. Remove the setscrew from the lower part of the handle.

6. Pull the handle away from the door to release it from the

shoulder screw. Keep all parts together.

7. Remove the decal covering the hole on the opposite side of

the door, where the refrigerator door handle will be installed,

and discard the decal.

8. Remove the shoulder screw from the left-hand side of the

door and fasten it into the hole that was behind the decal.

9. Place the handle on the shoulder screw and push the handle

toward the door until the mounting base is flush against the

door. Tighten the setscrew.

10. Fasten the top of the refrigerator handle to the top of the

refrigerator door.

A. Door stop screw

B. Door stop

A. Door stop screw

B. Door stop

A. Flat-head handle screws

B. Refrigerator door handle

¹⁄₄

" Setscrew

A. Flat-head handle screws

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 77 78

No comments

Whirlpool WRT371SZBM User's Guide Page 8