Whirlpool Model GH5184XP User Manual download pdf (Page 7)

MICROWAVE OVEN CONTROL

Display

When power is first supplied to the microwave oven, a “:” will

blink on the display. Touch CANCEL to stop the blinking. If the “:”

blinks on the display at any other time, a power failure has

occurred. Touch CANCEL and reset the clock if needed.

If “RETRY” blinks on the display for 1 second, an invalid value

has been entered. Retry your entry.

When the microwave oven is in use, the display shows cooking

power, quantities, weights and/or prompts. When the microwave

oven is not in use, the display shows the time of day or Timer

countdown.

Progress Bar

The progress bar is a visual picture of the estimated running time

of a cooking cycle. It will appear during all cook cycles except

Warm Hold. The lines in each of the segments will light from left

to right as the time nears the end. When all 15 lines (all

3 segments) are lit, the cooking cycle is complete.

Start/Add 30 Seconds

The START control shares function with the Add 30 Seconds

feature. The START pad will start any function. If not touched

within 5 seconds after touching a pad, “START?” will appear on

the display as a reminder. If not touched within 5 minutes after

touching a pad, the display will return to the time of day mode

and the programmed function will be canceled.

If cooking is interrupted, touching the START will resume the

preset cycle.

The ADD 30 SEC. control starts the oven at 100% power for

30 seconds, and adds 30 seconds of cook time with each

additional touch of the control. Once cooking begins, cook power

or cook time may be changed manually by touching the

appropriate display area and entering the new setting.

Easy Minute Feature

The numerical pads 1-5 share function with the Easy Minute

controls. When one of these controls is touched (while no

function is operating), the oven will begin cooking at high power

for 1-5 minutes, depending on which pad is touched. After

cooking begins, the Easy Minute controls return to their normal

numerical pad function.

Cancel

The CANCEL pad stops most functions except for the Timer,

Child Lock and Demo Mode.

The microwave oven will also turn off when the door is opened.

Close the door and touch START control to resume the cycle. A

sensor cooking cycle may not be resumed if interrupted by

opening the door.

Number Codes

The microwave oven is preset with shortcut number codes. A

number code includes one or more of the following: cooking

power, cook time and food quantity or weight. See the charts in

the “Cooking” and/or “Reheating” sections for additional

information.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

Whirlpool Model GH5184XP User Manual Page 7

Comments to this Manuals

Related products and manuals for Microwaves Whirlpool Model GH5184XP