Whirlpool EG1000EX User Manual download pdf (Page 19)

COOKER FINISH CLEANING METHOD

Vitreous Enamel

Hotplate (Traditional), pan supports,

burner caps, roasting dish, grill pan, oven

base, rear and roof, door inner panels,

grill and warming compartments.

Cloth wrung out in warm soapy water. Stubborn stains can be removed

with a cream paste, liquid cleaner or by rubbing with fine steel wool

soap pads e.g. Brillo, Ajax.

Check

that the cleaning agent is approved by the Vitreous Enamel

Association.

Aluminium

Burner bodies, door handles.

Similar to paint cleaning above. Use a nylon brush to remove any

cleaning materials, water or dirt from the hotplate burner ports. Care

should be taken when refitting the bodies over the electrodes.

Glass

As for enamel cleaning. Polish

with a clean dry cloth or kitchen roll.

Chromium Plating

Oven shelves, grill pan grid, grill pan

handle support.

Wipe with a cloth wrung out in warm soapy water. A fine steel wool soap

pad e.g. Brillo, Ajax, or a chrome or stainless steel cleaner may be used.

Plastic

Grill pan handle, control knobs, door

handle supports.

Wipe with a cloth wrung out in warm soapy water.

Stainless Steel

Door trims, control panel, hotplate

Wipe with a cloth wrung out in warm soapy water. Polish with a clean

dry cloth or kitchen towel. For stubborn stains, use a proprietary stainless

steel cleaner and follow the instructions on the container.

Paint

Side panels Wipe with a cloth wrung out in warm soapy water only. DO NOT USE

ABRASIVES.

Ceramic

Use a ceramic hob cleaner-conditioner whenever cleaning is done. The

cleaner-conditioner forms a protective film on the hob and contains a

mild detergent which makes cleaning easir.

A cleaner-conditioner can be obtained either through a local Service

Centre or retailer, part number 6004.

To clean off stubborn stains the following can be used when the surface

has cooled:

1. Cif, non-scratch cream cleaner.

2. Heavy soil can be removed from the surface by carefully using a

glass scraper.

3. Hard water stains, grease spots and any discolouration having a

metal sheen

can be removed with Solvol Autosol Super or any non

abrasive stainless steel cleaner.

After cleaning, always use the cleaner-conditioner and finish it off by

polishing with a clean, dry paper towel. Never use abrasive chemical

oven cleaners as they can damage the surface of the hob.

The visual effect of scratches which

may occur in use can be minimised

by the use of the cleaner-conditioner. Such scratches cannot be

removed but do not affect the function of the hob in any way.

Care and Cleaning

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comments to this Manuals

No comments

Whirlpool EG1000EX User Manual Page 19

Comments to this Manuals

Related products and manuals for Ovens Whirlpool EG1000EX