Whirlpool GBS307 Service Manual download pdf (Page 28)

4-8

REMOVING AN OVEN LIGHT &

AN OVEN TEMPERATURE SENSOR

CAUTION: When you work on the double

oven, be careful when handling the sheet metal

parts. Sharp edges may be present, and you

can cut yourself if you are not careful.

Electrical Shock Hazard

Disconnect power before servicing.

Replace all panels before operating.

Failure to do so could result in death or

electrical shock.

WARNING

Oven Temperature

Sensor & Lights

1. Disconnect the electrical power to the

double oven.

2. Open the oven door and remove the racks

from inside the oven.

3. To remove an oven light:

a) Unscrew the lens and remove the lens,

the decorative ring, and the bulb from

the socket.

4. To remove the oven temperature sen-

sor:

a) Remove the two mounting screws from

the oven temperature sensor and pull

the connectors out of the mounting hole

in the oven liner.

b) Disconnect the sensor connector from

the main wire harness connector.

Oven

Temperature

Sensor

Connector

b) Pry the socket ring and socket out of the

oven cavity hole. Press in on the socket

ring locking arms with a flat screwdriver

to release them.

Lens &

Ring

Bulb

Wires

Socket & Ring

Locking Arm

c) Disconnect the wires from the light

socket terminals.

REASSEMBLY NOTE: When you snap the

socket ring into the liner, position the ring tab in

the notch at the bottom of the hole.

Tab In Ring

Notch

Screw

(1 of 2)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 58 59

Comments to this Manuals

No comments

Whirlpool GBS307 Service Manual Page 28

Comments to this Manuals

Related products and manuals for Ovens Whirlpool GBS307