Whirlpool GBS307 Service Manual download pdf (Page 29)

4-9

REMOVING A BROIL ELEMENT

1. Disconnect the electrical power to the

double oven.

2. Open the oven door and remove the racks

from inside the oven.

4. Carefully pull the element forward so that

the terminal connectors are through the

oven liner holes, and disconnect the wires

from the terminals.

CAUTION: When you work on the double

oven, be careful when handling the sheet metal

parts. Sharp edges may be present, and you

can cut yourself if you are not careful.

Electrical Shock Hazard

Disconnect power before servicing.

Replace all panels before operating.

Failure to do so could result in death or

electrical shock.

WARNING

Broil

Element Wires

3. Remove the two front bracket screws and

two rear bracket screws from the broil

element.

Broil Element

Rear Bracket

Screws

Front Bracket

Screws

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 58 59

Comments to this Manuals

No comments