Whirlpool ACU124PK0 Use and Care Guide download pdf (Page 11)

The vent control

The vent draws stale or smoky air from the room,

or circulates existing room air.

To exhaust room air

1. Pull the vent control open.

2. Set the fan control to the desired setting.

If no cooling is desired, set the fan control

to HIGH FAN or LOW FAN (control panel A)

or FAN (control panel B).

3. Set the thermostat control to the desired

setting.

To circulate room air

1. Push the vent control closed.

2. Set the fan control to the desired setting.

If no cooling is desired, set the fan control

to HIGH FAN or LOW FAN (control panel A)

or FAN (control panel B).

3. Set the thermostat control to the desired

setting.

NOTE: For maximum performance, the vent

control must be in the closed position when

cooling or room air circulation is desired.

Changing air direction

The louvers in the top of the front panel allow you

to control the direction of the cooled air. Use the

tabs to direct the air up, down, right, left, or

straight ahead.

OPERATING INSTRUCTIONS

side to side

control

up or down

directional tab

side to side

control

up or down

directional tab

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Whirlpool ACU124PK0 Use and Care Guide Page 11