Whirlpool ACU124PK0 Use and Care Guide Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
12
Cleaning the slide-out filter
The filter is removable for easy cleaning. A clean
filter helps remove dust, lint, and other particles
from the air and is important for best cooling or
heating and operating efficiency. Check the filter
every 2 weeks to see if it needs cleaning. Do not
operate the air conditioner without the filter in
place.
1. Unplug air conditioner or disconnect power.
2. Grasp air filter at tabs. Slide air filter up and
out of filter slot.
3. Use a vacuum cleaner to clean air filter. If air
filter is very dirty, wash it in warm water with
mild detergent. Do not wash air filter in the
dishwasher or use any chemical cleaners. Air
dry filter completely before replacing to
ensure maximum efficiency.
4. Slide air filter down into filter slot.
6. Plug in air conditioner or reconnect power.
Cleaning instructions
Proper use and care of your air conditioner will
help ensure longer life of the unit and lower
operating costs. Follow these instructions
carefully. Call your local servicing dealer for an
annual checkup.
Cleaning the front panel
1. Unplug air conditioner or disconnect power.
2. Remove the front panel from unit for cleaning.
3. Place the tip of a thin blade screwdriver
against the cabinet behind the plastic
projection on the upper right side of the front
panel. Gently push with the screwdriver to
unlock the plastic projection and pull the front
panel forward. Repeat steps for plastic
projection on the bottom right side. Watch out
for the sharp metal fins on the front and rear
condenser coils.
4. Swing the right side of the front panel away
from the cabinet and unhook the plastic
projection on the left side.
5. Clean the front panel using a soft cloth with
warm water and a mild detergent. Rinse
and dry.
6. Replace the front panel. Hook the plastic
projections on the left side and swing the right
side into position. Gently press the right
corners back into position while pushing on
the side of the cabinet with the screwdriver.
7. Plug in air conditioner or reconnect power.
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments