Whirlpool 50 Hz Specifications download pdf (Page 12)

113312-2-BA (1093)

Kohler Co., Kohler WI

F. CONNECT CONTROL BOX - 230V, 50 HZ

Connect service to the field wiring compartment of the

control box. The 50 Hz model control box contains blue

and brown wires and earth lug.

A 230V, 15A, 50 Hz dedicated circuit is required. Provide

an Earth Leakage Circuit Breaker.

Provide a separate equipment earthing conductor for the

inside earth lug. The earthing conductor must not be

connected to any current carrying conductor. Follow

local electrical codes. A 230 V, 15A, 50 Hz separate

circuit is required.

Earth

(Ground) Lug

Earth

(Ground)

Neutral

Earthing Lug (for

bonding in accor-

dance with national

and local codes)

Blue

(Neutral)

Brown

(Phase)

Wire Connectors

Phase (Line)

9. WATER TEST WHIRLPOOL & ELECTRONICS

Check all electrical connections. Make sure both

connections to the pump are securely tightened.

Fill bath to a level at least 2” above the top of the highest

jet.

Operate whirlpool for 5 minutes and check all whirlpool

harness (piping) connections for leaks.

For additional information on whirlpool operation, see

Whirlpool Start-Up Instructions on page 14.

10. COMPLETE FINISH WALL

CAUTION: Risk of product damage. Do not

support the weight of the whirlpool by the rim.

Protect whirlpool surface. Install finished deck. Cover

framing and walls with gypsum wallboard.

Framing

Subwall

Wallboard

Finished

Deck

Access Panel

Tape and mud drywall...seal drywall and joints under

bath rim. Install finished wall material to subwall. Seal

joints between the whirlpool rim and finished wall using

silicone sealant.

Gypsum Wallboard

Finished

WallCovering

2 x 4 Stud

Water Resistant

Sealer

Finished

Deck

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Whirlpool 50 Hz Specifications Page 12

Comments to this Manuals

Related products and manuals for Washer dryers Whirlpool 50 Hz