Whirlpool 50 Hz Specifications download pdf (Page 5)

113312-2-BA (1093)

Kohler Co., Kohler WI

2. PRODUCT NOTICES

A. INSTALLER HAZARD NOTIFICATION

DANGER: Risk of fire, electric shock, or injury

to persons. Read important safety instructions on

inside front cover of these instructions.

WARNING: Risk of electrical shock. A licensed

electrician should make all electrical connections.

WARNING: Risk of electrical shock. Connect

only to a circuit protected by a Ground-Fault

Circuit-Interrupter (GFCI).

WARNING: Risk of electrical shock.

Disconnect power before servicing.

WARNING: Risk of injury or property damage.

Please read all instructions thoroughly before

beginning installation, including the following

Product Requirements.

NOTICE: Follow all local plumbing and electrical

codes.

B. FACTORY-ASSEMBLED FEATURES

Factory installed components include pump with integral

timer and air switch transmitter. No installation is

needed.

The whirlpool pump and piping are factory-assembled.

WARNING: Unauthorized modification may

cause unsafe operation and poor performance

of the whirlpool. Do not relocate the whirlpool

pump or make other modifications to the whirlpool

system, as this could adversely affect the

performance and safe operation of the whirlpool.

Kohler Co. shall not be liable under its warranty or

otherwise for personal injury or damage caused by

any such unauthorized modification.

3. PRODUCT REQUIREMENTS

A. SUMMARY OF KEY REQUIREMENTS

S Install unit to level subfloor.

S Provide properly dimensioned framing.

S Sunken installation is recommended.

B. PLUMBING SPECIFICATIONS

If using a rim mounted bath faucet, flexible connections

between the valves and spout may be required. Confirm

adequate mounting and connection space of specified

faucet for your installation.

Confirm adequate support for faucet; large faucets that

may be inadvertently used as a means of support are not

appropriate or safe for this installation.

C. PRODUCT INSPECTION

Carefully uncrate and inspect your product for damage.

Leave all materials in carton during construction to

prevent damage.

NOTICE: Make sure both connections to the

whirlpool pump are securely tightened.

D. CONNECTIONS AND SERVICE ACCESS

Before installation, ensure proper access to the final

connections.

NOTICE: Provide unrestricted service access to

the pump. An access panel 20” W x 15” H minimum

must be constructed to allow for sufficient clearance for

servicing the pump or controls. The access panel must

be located at the pump end of the whirlpool, through an

adjoining wall.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Whirlpool 50 Hz Specifications Page 5

Comments to this Manuals

Related products and manuals for Washer dryers Whirlpool 50 Hz