Whirlpool AUTOMATIC WASHER Specifications download pdf (Page 50)

4-10

REMOVING THE BASKET, BASKET HUB, & LlNT FILTER

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before

operating.

Failure to do so can result in death or

electrical shock.

WARNING

Ring Tabs

Recirculation Hose

e) Lift the basket out of the washer.

Impeller Cap

Impeller

7/16˝ Impeller Bolt

1. Unplug washer or disconnect power.

2. Raise the cabinet top (see page 4-4 for

the procedure).

3. To remove the basket:

a) Loosen the clamp and pull the recircu

lation hose off the tub ring.

b) Pry out and unsnap the tub ring tabs

from the tub and remove the tub ring.

c) Insert the blade of a small screwdriver

into the slot in the impeller cap, then

pry the cap up, and remove it.

d) Remove the 7/16˝ hex-head bolt from

the impeller, then lift and remove the

impeller from the basket.

NOTE: Lift-

ing the basket will assist in removing

the impeller.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 83 84

No comments

Whirlpool AUTOMATIC WASHER Specifications Page 50