Whirlpool AWM 8000/PRO Instruction for Use download pdf

GB 1

DEFINITION OF USE

This washing machine is exclusively destined to

wash and spin machine washable laundry.

•

Observe the instructions given in these Instructions

for Use, the Installation Guide and the Programme

Chart when using the washing machine.

•

Keep these Instructions for Use, the Programme

Chart and the Installation Guide; if you pass on the

washing machine to another person, also give him/

her Instructions for Use, Programme Chart and

Installation Guide.

BEFORE USING THE WASHING MACHINE

1.Removing the packaging and inspection

•

After unpacking, make sure that the washing

machine is undamaged. If in doubt, do not use the

washing machine. Contact After-Sales Service or

your local retailer.

•

Keep the packaging materials (plastic bags,

polystyrene parts, etc.) out of reach of children,

as they are potentially dangerous.

•

If the appliance was exposed to the cold prior to

delivery, keep it at room temperature for a few

hours before operating.

2.Remove the transport bolts

•

The washing machine is fitted with transport

bolts to avoid any possible damage to the interior

during transport. Before using the machine, it is

imperative that the transport bolts are removed.

•

After their removal, cover the openings with the

4 enclosed plastic caps.

3.Install the washing machine

•

Installation of the washing machine requires at

least 2 persons.

•

Remove the protective film from the control panel

(if available on your model).

•

Move the appliance without lifting it by the worktop.

•

Install the appliance on a solid and level floor

surface, preferably in a corner of the room.

•

Make sure that all four feet are stable and resting

on the floor and then check that the washing

machine is perfectly level (use a spirit level).

•

In case of wooden or so-called “floating floors”

(for instance certain parquet or laminate floors),

place the appliance on a 60 x 60 cm sheet of

plywood at least 3 cm in thickness which is

secured to the floor.

•

Make sure that the ventilation openings in the

base of your washing machine (if available on

your model) are not obstructed by a carpet or

other material.

4.Water inlet

•

Connect the water inlet hose(s) to the drinking

water supply in accordance with the regulations

of your local water company.

•

For models with one inlet valve: cold water

•

For models with two inlet valves: cold AND hot

water, or cold water only (see separate

Installation Guide).

•

Water tap: 3/4” threaded hose

connector

•

Water pressure

(flow pressure): 100-1000 kPa (1-10 bar).

•

Use only new hoses to connect the washing

machine to the water supply. Used hoses must

not be used and should be discarded.

•

We recommend to replace the inlet hoses by

new ones every 3 years.

•

For models with hot fill: the hot water inlet

temperature must not exceed 60°C.

5.Drain

•

Connect the drain hose to a ventilated siphon or

to a standpipe, using the U-bend (see Installation

guide). Make sure the connection is firm.

•

If the washing machine is connected to an

integrated drainage system, ensure the latter is

equipped with a vent to avoid simultaneous

loading and draining of water (siphoning effect).

6.Electrical connection

•

Electrical connections must be carried out by a

qualified technician in compliance with the

manufacturer’s instructions and current standard

safety regulations.

•

Data regarding voltage, power consumption and

protection requirements is given on the inside of

the door.

•

The appliance must be connected to the mains by

means of a socket with an earth connection in

accordance with current regulations. The

washing machine must be earthed by law. The

manufacturer declines all liability for damage to

property or injury to persons or animals due to

non-compliance with the directions given above.

•

Do not use extension leads or multiple sockets.

•

Before any maintenance on the washing machine

disconnect it from the mains supply.

•

After installation, access to the mains plug or to

disconnection from mains supply must be

ensured at all times via a double-pole switch, in

order to assure an immediate deactivation of the

washing machine in case of emergency.

•

Do not operate the washing machine if it has

been damaged during transport. Inform the

After-Sales Service.

•

Mains cable replacement is only to be carried out

by After-Sales Service.

7. Sound level

•

sound pressure level, Lpa <70 dB(A)

(Kpa: +/- 2,5 dB(A))

Minimum housing dimensions:

width: 600 mm / height: 850 mm / depth: 600 mm

30106380GB.fm Page 1 Friday, February 11, 2011 2:41 PM

Black process 45.0° 150.0 LPI

1 2 3 4 5 6 ... 12 13

Summary of Contents

Page 1 - DEFINITION OF USE

GB 1DEFINITION OF USEThis washing machine is exclusively destined to wash and spin machine washable laundry.•Observe the instructions given in these I

Page 2 - RECOMMENDATIONS

GB 10If any of the faults described above persist, unplug the appliance, turn off the water tap and contact our After-Sales Service (see next chapter)

Page 3 - BEFORE THE FIRST WASH CYCLE

GB 11AFTER-SALES SERVICEBefore contacting After-Sales Service:1.Try to remedy the problem yourself (see “Troubleshooting Guide”).2.Restart the program

Page 4 - DETERGENTS AND ADDITIVES

GB 12ELECTRICAL CONNECTIONmanufactured byWhirlpool Europe s.r.l.Via Argine 310-312I-80147 NaplesItalyFor Great Britain onlyWarning - this appliance mu

Page 5 - Using starch

GB 13EU - DECLARATION OF CONFORMITYWE: BAUKNECHT HAUSGERÄTE GmbH, D-73614 Schorndorf representing: WHIRLPOOL EUROPE S.r.l., I-21025 COMERIOdeclare und

Page 6 - CLEANING THE FILTER

GB 2PRECAUTIONS AND GENERAL RECOMMENDATIONS1.Safety instructions•The washing machine is appropriate for indoor use only.•Do not store flammable fluids

Page 7 - CARE AND MAINTENANCE

GB 3DESCRIPTION OF THE WASHING MACHINEDOORBEFORE THE FIRST WASH CYCLE1.Worktop2.Control panel3.Detergent dispenser4.Service plate (inside the door)5.D

Page 8 - TROUBLESHOOTING GUIDE

GB 4PREPARATION OF THE WASHING1.Sort the laundry according to...•Type of fabric / care label symbolCottons, mixed fibres, easy care/synthetics, wool,

Page 9

GB 5Where to put detergent and additivesThe detergent drawer has three chambers (fig. “A”).Prewash Chamber•Detergent for the prewashMain Wash Chamber•

Page 10

GB 6DRAINING RESIDUAL WATER/CLEANING THE FILTERWe recommend that you check and clean the filter regularly, at least two or three times a year, especia

Page 11 - TRANSPORT/HANDLING

GB 7CARE AND MAINTENANCEBefore any maintenance, always disconnect the washing machine from the mains.Appliance exterior and control panel•Can be washe

Page 12 - ELECTRICAL CONNECTION

GB 8TROUBLESHOOTING GUIDEYour washing machine is equipped with various automatic safety functions. These enable faults to be detected in good time and

Page 13 - WHIRLPOOL AWM 8000/PRO

GB 9Description of red indicationsRed indicationlights upDescriptionCausesSolutions“Water tap closed”Appliance has no or insufficient water supply. Th