Whirlpool WTW7340XW Use and Care Guide download pdf (Page 4)

CONTROL PANEL AND FEATURES

ESTIMATED TIME REMAINING DISPLAY

The Estimated Time Remaining display shows the time required

for the cycle to complete. Factors such as load size and water

pressure may affect the time shown in the display. Tightly

packed, unbalanced loads, or excessive suds may cause

the washer to adjust the cycle time, as well.

POWER/CANCEL BUTTON

Press to turn the washer ON or OFF.

WASH CYCLE KNOB

Use the Wash Cycle knob to select available cycles on your

washer. Turn the knob to select a cycle for your laundry load.

See “Cycle Guide” for detailed descriptions of cycles.

START/PAUSE BUTTON

Press to start the selected cycle. Be sure all desired

Modiﬁers and Options have been selected. Press START/

PAUSE once to unlock the lid and add a garment. Press

START/PAUSE again to complete the cycle from where it was

stopped. The lid must be closed for the washer to start.

CYCLE MODIFIERS

Modiﬁers allow you to further customize your cycles and

save energy. Not all cycles, options, and modiﬁers are

available on all models.

WASH TEMP

Select a water temperature based on the type of load

you are washing. Use the warmest wash water suitable

for fabrics. Follow garment label instructions.

All cycles use cold rinses. Cold rinses may help with

wrinkling and save energy.

NOTE: In wash water temperatures colder than 60°F

(15.6°C), detergents do not dissolve well. Soils may

be difﬁcult to remove.

SPIN SPEED

This washer automatically selects the spin speed

based on the cycle selected. The preset speeds

can be changed. Not all spin speeds are available

with all cycles.

• Faster spin speeds mean shorter dry times, but

may increase wrinkling in your load.

• Slower spin speeds mean less wrinkling, but will

leave your load more damp.

SOIL LEVEL

Soil Level (wash time) is preset for each wash cycle. As you

press Soil Level, the cycle time (minutes) will increase or

decrease in the Estimated Time Remaining display

and a different wash time will appear.

For most loads, use the Soil Level that is preset with

the cycle you have chosen. For heavily soiled and sturdy

fabrics, press SOIL LEVEL to select more wash time,

if needed. For lightly soiled and delicate fabrics, press

SOIL LEVEL to select less wash time, if needed. Lower Soil

Level settings will help reduce tangling and wrinkling.

CYCLE OPTIONS

When you select a cycle, its default options will light up. Not all

cycles, options, and modiﬁers are available on all models.

WATER SAVE SPRAY RINSE

Use this option to save water by using a spray rinse instead

of a deep water rinse. This option is the default setting on

some cycles, and selectable on other cycles. When using

fabric softener, always select the FABRIC SOFTENER

button, or select EXTRA RINSE; both of these options will

dispense fabric softener in a deep rinse.

OXI TREAT STAINS

Use this option to boost cleaning performance with

Oxi products. This washer is designed to dispense laundry

boosters such as oxygenated stain treaters and color-safe

bleach at the correct time in the cycle for best cleaning

performance, using the liquid chlorine bleach dispenser.

Do not use laundry boosters and chlorine bleach in the

same cycle.

CLEAN BOOST WITH HEATER

The Clean Boost with Heater option helps to ensure better

soil and stain removal. Clean Boost uses a heater within

the washer to maintain the selected temperature setting

throughout the wash period. This option will add some

additional time to the cycle based on which temperature

is selected. It is a preset cycle setting on the Sanitary and

Power Wash cycles. Clean Boost with Heater may be

selected as an option with other cycles.

Not all features and cycles are available on all models.

1 2 3 4 5 6 7 8 9 ... 47 48

Comments to this Manuals

No comments

Whirlpool WTW7340XW Use and Care Guide Page 4

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool WTW7340XW