Whirlpool ADG 934/1 WH Instruction for Use

66 GB SUMMARYBEFORE USING THE DISHWASHERPAGE67PROTECTING THE ENVIRONMENTPAGE67PRECAUTIONS AND GENERAL RECOMMENDATIONSPAGE67ENERGY AND WATER SAVING TI

75If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem.Restart the wash programme to

67•After unpacking, make sure the appliance is undamaged and that the door closes correctly. Do not use the appliance if it is damaged. If in doubt, c

68 Check the water hardness level in your area. Consult your local Water Board or check your last water bill.• Set the water hardness by turning the

69The rinse aid facilitates drying and prevents the formation of unsightly spots and streaks on crockery. Before using the dishwasher for the first ti

70 Only use detergents recommended for use in domestic dishwashers. If you use “new generation” enzyme-based detergents, select the Bio programmes wh

71Close the dishwasher door and turn on the water tap.1.Programme selector knob clicks out.Press and release the programme selector knob. The knob cli

72 Refer to the separate installation instructions booklet.Water inlet and drain:•Strictly follow local Water Board regulations.•Make sure the inlet

731) ELECTRICAL CONNECTIONS“Warning - this appliance must be earthed”This appliance is normally supplied with a mains lead having a plug fitted in the

74 Before cleaning or carrying out maintenance, press the ON/OFF button.1.Clean the appliance exterior with a neutral detergent. Do not use abrasive