Whirlpool ADG 934/1 WH Instruction for Use download pdf (Page 4)

The rinse aid facilitates drying and prevents the

formation of unsightly spots and streaks on

crockery. Before using the dishwasher for the

first time, fill the rinse aid dispenser.

Thereafter, regularly check the rinse aid level.

Only use rinse aids recommended for use in

domestic dishwashers.

Unscrew the cap and press button

(see drawing). Fill the dispenser with rinse

aid up to the dashed line (about 100 ml

maximum).

2. Immediately wipe away any spilt rinse aid

to prevent excess suds which may spoil

washing results.

Replace the cap.

How to adjust the rinse aid dosage

regulator.

(Open the cover and close again following

adjustment).

Factory setting: 3.

If you are not satisfied with washing or drying

results, change the dial setting with a spoon

handle or coin.

If crockery is prone to whitish streaks, reduce the

dosage by turning the dial to a lower setting. If

instead crockery is wet, increase the dosage by

turning the dial to a higher setting.

Rinse aid level indicator (visual or

electric indicator depending on the

model installed).

Electric indicator:

The indicator lamp on the control panel

illuminates when the rinse aid dispenser is

empty.

Visual indicator:

light

= empty;

dark

= full.

HOW TO FILL THE RINSE AID DISPENSER

1 2 3 4 5 6 7 8 9 10

No comments

Whirlpool ADG 934/1 WH Instruction for Use Page 4