Whirlpool LL 430 FR.C/HA Instruction for Use download pdf (Page 21)

Shutting off the water and electricity

supplies

 Turn off the water tap after every wash cycle to avoid

leaks.

 Remove the plug from the socket when cleaning the

machine and when carrying out maintenance work.

Cleaning the dishwasher

 The external surfaces of the machine and the control

panel may be cleaned using a cloth dampened with

warm soapy water. Do not use solvents or abrasive

products.

 Any marks on the appliance interior may be removed

using a cloth dampened with water and a little

vinegar.

Preventing unpleasant odours

 Always keep the door of the appliance ajar in order

to avoid moisture from forming and being trapped

inside the machine.

 Clean the seals around the door and detergent

dispensers regularly using a damp sponge. This will

avoid food becoming trapped in the seals, which is

the main cause of the formation of unpleasant

odours.

Cleaning the sprayer arms

Food residue may become

encrusted onto the sprayer

arms and block the holes

used to spray the water. It is

therefore recommended that

the arms are checked from

time to time and cleaned with

a small non-metallic brush.

Cleaning the filters

The filters remove food residue from the water used in

the wash cycle: to obtain the best results from each

wash, they should be cleaned.

Clean the filters regularly.

After cleaning check that the filter assembly has

been replaced correctly.

The dishwasher should not be used without filters or

when the filter is loose..

1. Remove the filters by pulling the handle upwards.

2. Clean the filters:

 after every wash cycle,

remove the largest pieces

of residue from

semicircular plate A and

glass B (these may be

removed by pulling the

handle) by rinsing them

under running water.

 The entire filter assembly

should be cleaned thoroughly

once a month: this includes

the semicircular plate A, the

glass B and the cylinder C

(this may be removed by

turning it in an anti-clockwise

direction). Use a small non-

metallic brush to clean these parts.

3. Reconstruct the filter assembly and replace it in the

correct position, following movements 1 and 2 as shown

in the figure, until it clicks into place.

Leaving the machine unused for

extended periods

 Disconnect the appliance from the electricity supply

and shut off the water tap.

 Leave the door of the appliance ajar.

 When you return, run a wash cycle when the

dishwasher is empty.

Care and maintenance

1 ... 20 21 22 23 24

Comments to this Manuals

No comments

Whirlpool LL 430 FR.C/HA Instruction for Use Page 21

Comments to this Manuals

Related products and manuals for Dishwashers Whirlpool LL 430 FR.C/HA