Whirlpool Duet Steam User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Duet
®
Front-Load Washer
WFW88HEA
AA208066 WL120251®Registered trademark/™ Trademark of Whirlpool, U.S.A. ©2012. All rights reserved.
Dimensions are for planning purposes only. For complete details, see
Installation Instructions packed with product. Specifications subject to
change without notice.
Specifications Dimensions
Front-Loading Automatic Washer
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
WFW94HEX, WFW95HEX,
WFW97HEX
Electrical: A 120 volt, 60 Hz., AC only, 15- or 20-amp,
fused electrical supply is required. A time-delay fuse
or circuit breaker is recommended. It is recommended
that a separate circuit serving only this appliance
be provided.
Washer dimensions
Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only. For complete details, see Installation
our products, we reserve the right to change materials and specications without notice. Instructions packed with product. Specications subject to change without notice.
Ref. W10254447
08/2010
Drain System Options
31
1
/2"
(800 mm)
27"
(686 mm)
38"
(965 mm)
51"
(1295 mm)
7"
(178 mm)
14"
(356 mm)
1"
(25 mm)
4"
(102 mm)
1"
(25 mm)
34" min.
(864 mm)
1"
(25 mm)
4"
(102 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
39" min.
(990 mm)
1"
(25 mm)
5"
(127 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
77
1
/2"
(1969 mm)
6"
(152 mm)
1"
(25 mm)
Custom cabinet installation:
Recessed area or closet installation (washer only):
Recessed area or closet installation
(stacked washer and dryer):
Custom under counter installation:
Floor standpipe drain system
4
1
/2"
(113 mm)
Wall standpipe drain system
4
1
/2"
(113 mm)
Laundry tub drain system
Minimum capacity: 20 gal. (76 L).
Top of laundry tub must be at least
30" (762 mm) above oor; install no
higher than 96" (2.44 m) from bottom
of washer.
30"
(762 mm)
min.
4
1
/2"
(113 mm)
Floor drain system requires a Siphon Break Kit (Part
Number 285834) and additional drain hose (Part Number
8318155) with a connector kit (Part Number 285835) that
may be purchased separately. To order, please see toll-
free phone numbers in your Washer User Instructions.
Minimum siphon break: 28" (711 mm) from bottom of
washer. (Additional hoses might be needed.)
Floor drain system
Drain system can be installed using a oor drain, wall
standpipe, oor standpipe, or laundry tub. Select
method you need.
IMPORTANT: To avoid siphoning, 4.5" (113 mm) of
drain hose should be inside standpipe or below the top
of wash tub. Always secure drain hose with beaded tie
strap.
Minimum diameter for a standpipe drain: 2" (51 mm).
Minimum carry-away capacity: 17 gal. (64 L) per minute.
A
1
/
4
" (6 mm) diameter to 1" (25 mm) diameter Standpipe
Adapter Kit is available (Part Number 280130). To order,
please see toll-free phone numbers on front page of your
Washer User Instructions. Top of standpipe must be at
least 30" (762 mm) high; install no higher than 96" (2.44 m)
from bottom of washer. If you must install higher than 96"
(2.44 m), you will need a sump pump system.
Duet
®
Washer moDel WFW88hea
recommenDeD Dryer We/GD88hea
Keeps clothes looKinG neWer lonGer*
Capacity 4.3 cu ft.
Energy Star Qualified Yes - Tier III
Tap Touch Controls Yes
LED display with estimated time remaining Yes
Drum Material Stainless Steel
Heater Yes
Number of Cycles 11
Steam-Enhanced Cycles Yes
Eco-Boost Option Yes
Presoak Option Yes
Allergen Yes
Sanizitation Yes
Clean Washer Yes
Quick Wash Yes
Cold Wash Yes
Delicates Yes
colors c,W
C=Chrome Shadow, W=White
***Intermittent tumbling in the washer helps reduce the growth of odor-causing bacteria.
***Thanks to the Adaptive Clean wash system with Precision Dispense Ultra or Precision Dispense.
***Compared to traditional top load washers.
Dimensions
Carton Depth 35
Carton Height 39 1/8
Carton Width 29 7/16
Depth 32 3/4
Height 38 1/2
Width 27
Gross Weight 255
Install Depth Max 52 3/4
Install Depth Min 36 1/2
Note: All dimensions are shown in inches.
52 1/4"
(1327) mm
38 1/2"
(978) mm
27"
(686 MM)
32 3/4"
(821) mm
Page view 1
1 2 3 4

Comments to this Manuals

No comments