Whirlpool W10115228B User Manual download pdf (Page 22)

Check door strike alignment

14.

Close door and check that door strike aligns with door catch.

If it is needed, slide door catch left or right within slot to

adjust alignment.

Troubleshooting

See the “Use and Care Guide” or visit our website and

reference “Frequently Asked Questions” to possibly avoid

the cost of a service call.

Insert screws in hinge holes on

dryer cabinet

12.

NOTE: 2 people maybe needed to reinstall door.

Insert screws into the bottom holes on left side of dryer

cabinet. Tighten screws halfway. Position door so large end of

door hinge slot is over screws. Slide door up so screws are in

bottom of slots. Tighten screws. Insert and tighten top screws

in hinges.

Remove and transfer plugs

11.

Remove the 4 screws that attach 2 plugs on the left side.

Transfer plugs to opposite side using the same 4 screws.

Remove door strike from dryer cabinet and set aside.

Remove door strike

10.

Remove door strike plug. Insert the door strike removed in

Step 10 into hole and secure with screw. Insert door strike

plug into original door strike hole and secure with screw.

Remove door strike plug

13.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

No comments

Whirlpool W10115228B User Manual Page 22