Whirlpool GARF30FDGB Use and Care Manual download pdf (Page 10)

Open the product door for easier access to the foot pedal

area. On both sides of the product, loosen the lower

3/8" hex-head bracket screw (B), exposing 1/4" of the

thread, and fully withdraw the upper 3/8" hex-head foot

pedal screw (A).

Align the circular parts of the foot pedal keyholes with the

lower 3/8" hex-head bracket screws. Hang the pedal on the

lower bracket screws. If the keyhole does not fully engage,

loosen the bolt until engaged.

On the door hinge side, use a TORX

T25

screwdriver or a

3/8" nut driver to feed the screw through the pedal bracket

mounting hole and tighten to the cabinet.

On the non-hinged side, use a TORX

T25

screwdriver or a

3/8" nut driver to feed the screw through the pedal bracket

mounting hole and two spacers provided, and tighten to the

cabinet.

Helpful Tip: If you are having trouble attaching the two

spacers between the bracket and cabinet, tape the spacer to

the back of the pedal bracket mounting hole with a strip of

transparent tape before adding the screws.

Tighten the second screw with a 3/8" wrench or 3/8" Ratchet

wrench.

Use a Phillips screwdriver to make adjustments to the foot

pedal actuator screw to adjust the foot pedal to your liking.

9. Prepare For Foot Pedal

Installation

11. Reinstall The Foot Pedal Bolt 12. Adjust Actuator Screw If

Desired

10. Align And Hang Foot Pedal

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

No comments

Whirlpool GARF30FDGB Use and Care Manual Page 10