Whirlpool AMD 383 Instruction for Use download pdf (Page 4)

1) ON/OFF (Fig.2)

• Press this button the unit will start.

• When repress the button, the unit will stop running.

2) Fan control (Fig. 3) (The relevant contents are shown in the figure.)

• Press this button to change the fan speed of:

• At the DRY mode: the fan speed will be set for low fan speed automatically.

3) Temperature adjustment (Fig.4)

• Press the temperature adjustment button

: For temperature increase;

: For temperature decrease.

(Press this button once, the temperature will be increased or decreased by 1°C)

NOTE: Lock function:

Press " " and " " at the same time for 5 seconds, the set temperature

indicating area shall display "EE" and all keys' response shall be shut off, all buttons

will sound; and repress the " " and " " simultaneously for 5 seconds, the lock function will be released.

When the displayer of long-distance monitoring or central controller has been shielded, the buttons and

remote control signal will be shielded too, the setting temperature will display "CC".

• The set temperature range under each mode:

HEAT 16°C ~ 30°C

COOL 16°C ~ 30°C

DRY 16°C ~ 30°C

FAN The temp. cannot be set up

AUTO The temp. cannot be set up

4) Swing mode set up (Fig.5)

• when pressing "SWING" button, the type style "SWING" will be displayed on

LCD, the unit will run in Swing mode

• when repressing the "SWING" button, that the type style "SWING" will be

disappeared, and the unit will stop running in Swing mode.

Note: The SLEEP function could be set up by wireless remote control.

5) Sleep mode set up (Fig. 6)

When under the cooling or dehumidifying mode, after receiving the SLEEP order

for 1 hour, the previous set temperature Tset will be risen for 1°C, and another

1°C will be risen after 2 hours that means that the temperature been risen 2°C

within 2 hours. Then the unit will run according to this set temperature.

When under the heating mode, after receiving the SLEEP order for 1 hour, the

previous set temperature Tset will be lower for 1°C, and another 1°C will be

lower after 2 hours that means that the temperature been lowered 2°C within 2

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

1 2 3 4 5 6 7 8 9 ... 31 32

No comments

Whirlpool AMD 383 Instruction for Use Page 4