Whirlpool AMD 383 Instruction for Use download pdf (Page 6)

9) SAVE set up (Fig. 10)

At unit turned off, to press the "FAN" +" " buttons continuously for 5 seconds,

adjust the Saver set menu, at this time displays "SAVE" "COOL" icons, (if it is the

first setup, that will display the initial value:26 °C), at the temperature setting

district, it displays the lower limit temperature,and the set temperature flashes,

by pressing " " and " " buttons to set the cooling temperature lower limit (the

setting range is 16~30), press "ON/OFF" button to confirm; by pressing " " and

" " buttons to set cooling temperature upper limit, it will flash and display at

ambient temperature, (the setting range is 16-30), and press "ON/OFF" button to

confirm.

NOTE: The upper limit temperature should not be lower than the setting lower limit temperature. If

upper limit temperature is lower than the lower limit temperature, the system will default. The higher is

the upper limit temperature, the lower is the lower limit temperature. Press "MODE" button, to complete

the save setting in COOL, DRY mode, and transfer to the save setting in HEAT mode (There is no the

function in cooling only unit), at this time, it displays the "SAVE", "HEAT" icons, after setup has been

completed, then press "FAN" + " " button last for 5 seconds, and quit the SAVE setting operation. If the

SAVE interface has been opened, the system will respond to the last button input after 20 seconds, there

is no any operation, the system will quit the menu, and displays the normal unit off interface.

The above setting has been completed, the system will display "SAVE" icon, no matter by buttons on

displayer or the wireless remote control, the setting temperature should not exceed the former SAVE

setup temperature range, for example as show in Fig. 9, we set up the cooling lower limit is 23 °C in SAVE

setting, the upper limit is 27 °C , the user can set the cooling temperature between 23 °C to 27 °C by the

wireless remote control and buttons on displayer.

If the set up upper limit temperature is the same with the lower limit temperature that the system only

can run at the corresponding modes at the set temperature. After the SAVE mode set up, at unit turned

off, press the "FAN" + " " buttons for 5 seconds, will quit the SAVE setting function, but the former

setting data will not clear, and the next time SAVE setting will be the initial setting temperature.

After powered off, the SAVE setup function will be memorized, the next time power on, the SAVE setting

is still active.

Set up the SAVE mode, the SLEEP, AUTO modes will shield.

10) MEMORY function setup (Fig. 11)

At unit turned off, press "MODE" button for 10 seconds, could switch whether

turn on or off the unit state after powered off, at setting temperature district

displays 01, denote that the unit is turned off after powered off, 02 denote that

do not memorize the unit turn on or turn off, press "ON/OFF" button quit

setting. If the memory turn on and off interface is displayed, the system will quit

the menu, the system will respond to the last button input after 10 seconds, there

is not any operation, the system will quit the menu, and displays the normal unit

off interface, the memory function setting still have been stored.

Fig. 10

Fig. 11

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

No comments

Whirlpool AMD 383 Instruction for Use Page 6