Whirlpool ED22MK User Manual download pdf (Page 7)

Ice cube trays...

To remove ice:

Hold tray at both ends.

. Slightly twist

If cubes are not used, they may shrink The movtng

cold air starts a slow evaporation The longer cubes

are stored, the smaller they get

Optional automatic ice maker...

d&e Signal

Arm to Stop Ice Maker

lower Signal

Arm to Start It

If you have the automatic ice maker accessory or

plan to add one later (Part No. ECKMF-6). there are

a few things you will want to know:

The ON /OFF lever is a wire signal arm.

Down., .for making Ice automutically:

Up,, to shut off the ice ‘maker.

Shake the bin occaslonally to keep cubes sepa-

rated, and to obtain increased storage capacity.

It is normal for ice crescents to be attached by a

corner. They will break apart easily.

You will hear water running when ice maker is

working. You’ll hear ice fall into the bin Don’t let

these sounds bother you.

The ice maker WIII not operate until the freezer is

cold enough to make ice. This can toke overnight.

Because of new plumbing connections, the first

ice may be dlscolored or off-flavored Discard the

first few batches of Ice.

If Ice

not being made fast enough and more Ice

is needed, turn the Temperature control to a higher

number. Wait a day and, If necessary. turn the Air

Control to a higher number

If you remove the ice bin, raise the signal arm to

shut off the ice maker. When you return the bin,

push it all the way in and lower the arm to the ON

positlon.

If cubes are stored too long, they may develop an

off -flavor like stale water. Throw them away. They

WIII be replaced. Cubes in the ice bin can also

become smaller by evaporation

Changing light bulbs...

Before removing a light shield for cleaning or for

replacing a bulb, unplug the retrigerator. Use

up-

plmnce bulbs only

Pull Off the

Pull Out at the

Ught bulbs behind refrigerator and freezer

control consoles:

- Pull control knob straight off.

- Pull bottom of control panel straight out.

-Lift top of panel off supports.

- Replace with a 40.watt appliance bulb.

- Replace panel In reverse order.

Light bulb behind crispers:

Remove crispers and crisper covers.

Bulb is on back wall of refrigerator.

Replace with a 40-watt appliance bulb.

Replace crisper and crisper cover.

Plug in the refrigerator.

Removing the base grille...

Open the doors.

Pull grille outwards as shown.

Do not remove Tech sheet fastened behind grille

Support Tabs

To replace:

Line up grille support tabs with metal clips

Push firmly to snap into place.

Close the doors.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Whirlpool ED22MK User Manual Page 7

Comments to this Manuals

Related products and manuals for Fridges Whirlpool ED22MK