Whirlpool EL7ATRRMQ00 User Manual download pdf (Page 5)

Electrical Requirements

Before you move your refrigerator into its final location, it is

important to make sure you have the proper electrical

connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your refrigerator be provided. Use an outlet

that cannot be turned off by a switch. Do not use an

extension cord.

NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, turn the Temperature Control to the off

position as shown and then disconnect the refrigerator from the

electrical source.

When you are finished, reconnect the refrigerator to the electrical

source and reset the Temperature Control to the desired setting.

Door Handle Installation and Removal

Tools Needed: Flat-blade screwdriver

1. Place the handle on the door as shown.

2. Using a flat-blade screwdriver, attach the handle to the door

with the 4 handle screws (provided).

3. Place the trim pieces on the upper and lower handle ends as

shown.

NOTE: Some models have an (optional) gold trim piece that

snaps on the handle ends before placing the end trim pieces.

4. Apply firm pressure with your hand on the face of the trim.

Slide the top trim down and the bottom trim up toward the

handle.

5. To remove the handle, reverse these directions.

Door Closing

NOTE: Keep the 2 bolts that secured the refrigerator in the

shipping case. They are the front leveling legs.

Your refrigerator has 2 adjustable leveling legs. If your refrigerator

seems unsteady or you want the doors to close easier, adjust the

refrigerator's tilt using these instructions.

1. Screw the legs all the way into the bolt holes in the bottom

corners of the refrigerator.

2. Plug into a grounded 3 prong outlet.

3. Move the refrigerator into its final position.

4. Adjust the front legs just enough to lift the cabinet up off of

the floor.

NOTE: If your model is equipped with rollers, the front legs

should be lowered enough to lift the rollers off of the floor to

ensure the refrigerator does not roll forward when the door is

opened.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in

death, fire, or electrical shock.

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

1. Handle trim

2. Handle screws

3. Door handle

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments

Whirlpool EL7ATRRMQ00 User Manual Page 5

Comments to this Manuals

Related products and manuals for Fridges Whirlpool EL7ATRRMQ00