Whirlpool Roper RT14BKXFN02 User Manual download pdf (Page 25)

REVEWING THE DOOR SWING

(on some models)

TOOLS NEEDED:

Reversing the hinges

%6-inch hex-head socket wrench, No. 2 Phillips screw-

driver, flat-head screwdriver, %-inch open-end wrench.

SUGGESTION: Reversing the door swing should be

performed by a qualified person.

IMPORTANT INFORMATION:

0 Before you begin, turn refrigerator OFF, unplug it, and

remove any food from door shelves.

0 When removing hinges, keep doors closed until ready to

lift free from cabinet.

0 To remove doors, start at the top hinge and work your

way down.

0 To replace doors, start at the bottom hinge and work

your way up.

CENTER HINGE

0 Line up doors so they are centered between the sides of

the cabinet and parallel with each other.

0 Seal all unused openings with screws or plastic plugs.

Moisture will enter any openings.

Screws -

NOTE: After the doors are reversed, reinstall the handles.

If the doors are not shutting on their own, see “Leveling”

in the “Installing Your Refrigerator” section.

BOTTOM HINGE

Door stop,

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 54 55

No comments

Whirlpool Roper RT14BKXFN02 User Manual Page 25