Whirlpool WRF560SFYW User Manual download pdf (Page 19)

Ice and Water

Temperature is too cold in

the refrigerator/crisper

The refrigerator air vent(s) are blocked If the air vent located in the top, left, rear corner of the

refrigerator compartment is blocked by items placed directly

in front of it, the refrigerator will get too cold. Move items

away from the air vent.

The controls are not set correctly for

the surrounding conditions

Adjust the controls a setting warmer. Check the temperature

in 24 hours. See “Using the Control(s).”

The ice storage bin is not in the correct

position (on some models)

Make sure the ice storage bin is positioned so that it is not

blocking airflow.

Temperature is too cold in

the pantry drawers

(on some models)

The control is not set correctly for the

items stored in drawer

Adjust the control setting. See “Refrigerator Features.”

There is interior moisture

buildup

NOTE: Some moisture

buildup is normal.

The room is humid A humid environment contributes to moisture buildup.

The door(s) are opened often or not

closed completely

Allows humid air to enter the refrigerator. Minimize door

openings and close doors completely.

The door is blocked open Move food packages away from door.

A bin or shelf is in the way Push bin or shelf back into the correct position.

Storing liquid in open containers This adds humidity to the refrigerator interior. Keep all

containers tightly covered.

There is frost/ice buildup in

the freezer compartment

The doors are opened often or left

open

Minimize door openings and keep doors fully closed.

Poor door seal Ensure door seals are making full contact with the refrigerator

cabinet to allow for an adequate seal.

Temperature controls are not set

correctly

See “Using the Controls” for recommended temperature

settings.

PROBLEM POSSIBLE CAUSES SOLUTIONS

The ice maker is not

producing ice or is not

producing enough ice

(on some models)

The refrigerator is not connected to a

water supply or the water supply

shutoff valve is not turned on

Connect refrigerator to water supply and turn water shutoff

valve fully open.

There is a kink in the water source line A kink in the line can reduce water flow. Straighten the water

source line.

The ice maker is not turned on Make sure the ice maker is on.

The refrigerator has just been installed Wait 24 hours after ice maker installation for ice production to

begin. Wait 3 days for full ice production.

The refrigerator door is not closed

completely

Close the door firmly. If it does not close completely, see “The

doors will not close completely.”

A large amount of ice was recently

removed

Allow 24 hours for ice maker to produce more ice.

An ice cube is jammed in the ice maker

ejector arm

Remove ice from the ejector arm with a plastic utensil.

NOTE: On some models, press the lever which opens the ice

maker door to access the ejector arm.

A reverse osmosis water filtration

system is connected to your cold

water supply

This can decrease water pressure. See “Water Supply

Requirements.”

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Comments to this Manuals

No comments

Whirlpool WRF560SFYW User Manual Page 19

Comments to this Manuals

Related products and manuals for Fridges Whirlpool WRF560SFYW