Whirlpool WRV996FDEH Use and Care Manual download pdf (Page 9)

999999

Align Refrigerated Drawer Fronts

When the drawer fronts are aligned, the width of the vertical space

(A) between the refrigerator doors (B) and the drawer fronts (C) is

the same thickness, and the drawers appear level.

Aligning the drawer fronts is a two-step process. The first step is

to adjust the drawer fronts up and down. The second step shifts

the drawer fronts from side to side. Visually inspect the

refrigerator for alignment and adjust the drawer fronts as needed.

Step 1 - Adjust the Drawer Fronts Up/Down

IMPORTANT: Each refrigerated drawer can be adjusted up and

down on both the left and the right sides.

Tools Needed: Phillips screwdriver

1. With the drawers closed, identify the drawer front that needs

to be raised or lowered.

2. Open the drawer to its full extension. Grasp the sides of the

interior bin, and then lift it up and out to remove.

3. Locate the drawer glide brackets (A).

4. Insert the Phillips screwdriver into screw (A) and turn

counterclockwise to loosen the drawer front.

5. Insert the Phillips screwdriver into screw (B) to adjust the

drawer front.

IMPORTANT: The direction you turn screw (B) depends on

which side of the drawer you are adjusting.

Left-Hand Side Drawer Glide

■ To raise the drawer front, turn screw (B) clockwise.

■ To lower the drawer front, turn screw (B)

counterclockwise.

A. Drawer glide brackets

A. Tightening screw

B. Adjusting screw

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 111 112

No comments

Whirlpool WRV996FDEH Use and Care Manual Page 9