Whirlpool AMD 383 Instruction for Use download pdf (Page 14)

About AUTO mode

When AUTO mode is selected, the setting temperature will not be

displayed on the LCD, the unit will be in accordance with the room

temperature automatically to select the suitable running method and to

make ambient comfortable.

+ key

This key is used for increasing preset temperature. When pressing this

button temperature can be increased. When pressing and holding this

button down for more than 2 seconds the content will change rapidly.

When desired temperature is displayed simply release the button. C° is

always shown on the display. Temperature setting range: 16-30 C°.

In Auto mode the temperature cannot be set, but when pushing this

button the signal is sent to the indoor unit.

- key

This key is used for lowering preset temperature. When pressing this

button temperature can be decreased. When pressing and holding this

button down for more than 2 seconds the content will change rapidly.

When desired temperature is displayed simply release the button. C° is

always shown on the display. Temperature setting range: 16-30 C°.

In Auto mode the temperature cannot be set, but when pushing this button the signal is sent to the indoor

unit.

FAN

FAN key

Press this button, Auto, Low, Middle, High speed can be circularly selected. After powered on, Auto fan

speed is default.

Under Dehumidify mode, Low fan speed only can be set up.

Low fan

Middle fan

High fan

SWING

SWING UP and DOWN key

When the unit is running, press this key to activate the swing function, indicated by the swing icon. Press

again to stop the swing function.

If guide louver is stopped when it is swinging up and down, it will remain its present position.

Indicates guide louver swings back and forth in all the five places, as shown in the figure .

Remote Control

OFF

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Whirlpool AMD 383 Instruction for Use Page 14