Whirlpool WET4024EW Installation Guide download pdf (Page 20)

2. Remove terminal block cover

Before you start, disconnect power. Remove hold-down

screw (B) and terminal block cover (C).

A. Center terminal block screw

B. Hold-down screw

C. Terminal block cover

D. External ground conductor screw

Electrical Connection, 24" models (U.S.A. Only)

Power Supply Cord Direct Wire

Electrical Connection Options

1. Choose electrical connection type

Power supply cord 4-wire receptacle

(NEMA Type 14-30R): Go to “4-wire

Power Supply Cord Connection” section.

Then, go to “Venting Requirements.”

3-wire direct connection: Go to “3-wire

Direct Wire Connection” section. Then go

to “Venting Requirements.”

4-wire direct connection: Go to “4-wire

Direct Wire Connection” section. Then go

to “Venting Requirements.”

Power supply cord 3-wire receptacle

(NEMA Type 10-30R): Go to “3-wire

Power Supply Cord Connection” section.

Then go to “Venting Requirements.”

NOTE: If local codes do not permit connection of a

cabinet-ground conductor to neutral wire, go to “Optional

3-wire Connection” section. This connection may be

used with either a power supply cord or a direct wire

connection.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 87 88

No comments

Whirlpool WET4024EW Installation Guide Page 20