Whirlpool AUTOMATIC WASHER Specifications download pdf (Page 25)

3-5

Do not overﬁll. The dispenser holds

3 oz. (94 mL), or a capful of fabric soft

-

ener.

The fabric softener is dispensed in the

ﬁnal rinse. If Extra Rinse is selected, the

fabric softener will be dispensed during

the Extra Rinse.

Do not spill or drip any fabric softener

onto the clothes.

At the end of the cycle, a small amount

of water may be left in the dispenser.

This is normal.

NOTE: Use only liquid fabric softener

in this dispenser.

6. Close the washer lid.

7. Press POWER. This turns on the washer

display.

8. Select a Wash Cycle. See “Cycles,” page

3-6.

9. Select the desired Modiﬁers. See “Modi-

ﬁers,” page 3-8.

10. Select an Option, if desired. See “Options,”

page 3-10.

11. Select Delay Wash, if desired. See “Delay

Wash,” page 3-9 in the “Modiﬁers” sec

-

tion.

12. Press START. The wash cycle begins, and

the display shows the estimated remaining

time. The lid will lock.

NOTE: If you do not press Start within 5

minutes of pressing Power, the washer

automatically drains and shuts off.

PAUSING OR RESTARTING

THE WASHER

ADD A GARMENT

You can place additional clothing in the wash

when the “Add a Garment” status light is glow

-

ing without sacriﬁcing wash performance.

To add a garment or pause the washer at

any time:

1. Press PAUSE/CANCEL once.

2. Wait until the Lid Lock light turns off, then

open the lid.

3. Add items.

•

•

•

•

To restart the washer:

1. Close the lid and press START.

2. To unlock the lid after the Add a Garment

period, press PAUSE/CANCEL once.

Pressing PAUSE/CANCEL twice will can

-

cel the wash cycle.

STOPPING THE WASHER

You can stop the wash cycle and drain the tub

by pressing the PAUSE/CANCEL button twice

or the Power button once.

CHANGING CYCLES, MODIFIERS

AND OPTIONS

You can change Cycles, Modiﬁers and Options

anytime before Start is pressed. Not all Modiﬁers

and Options are available for all cycles.

A short tone sounds when a change is se-

lected.

Three short tones sound if an unavailable

combination is selected. The last selection

will not be accepted.

CHANGING CYCLES AFTER PRESSING

START

1. Press PAUSE/CANCEL twice to cancel

the cycle. The washer will drain.

2. Press POWER.

3. Select the desired wash cycle.

4. Select the desired Modiﬁers and Op

-

tions.

5. Press START.

The washer restarts at the beginning of the

new cycle.

NOTE: If you do not press Start within 5 minutes

of pausing the washer, the washer automati

-

cally shuts off.

•

•

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 83 84

Comments to this Manuals

No comments