Whirlpool AUTOMATIC WASHER Specifications download pdf (Page 45)

4-5

g) Lower the cabinet top.

h) Slide the power supply cord strain relief

out of the housing and move it away from

the valve assembly.

i) Remove the two hex-head screws from

the water inlet/dispenser valve assem

bly, and remove the assembly from the

washer.

Water Inlet/Dispenser Valve Assembly

Screw Screw

Strain Relief

5. To remove the power supply cord:

a) Disconnect the power supply cord

connector from the machine/motor

control.

b) Remove the hex-head screw from the

green ground wire.

c) Slide the power supply cord strain re

lief out of the housing and remove the

cord.

Connector

Power Supply

Cord Strain Relief

Ground Screw

6. To remove the machine/motor control

& pressure transducer:

a) Disconnect the nine wire connectors

from the control.

b) Pull the pressure transducer tube off

the fitting on the control.

c) Remove the hex-head mounting screw.

d) Lift the front of the control, slide it out

from under the clips at the back, and

remove it.

P4 P13 P5 P9 P10

P12

Pressure Transducer

Tube

P11

Machine/Motor Control

Screw

f) Loosen the clamps and remove the four

hoses going to the water inlet/dispenser

valve assembly.

Water Inlet/Dispenser Valve Hoses

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 83 84

Comments to this Manuals

No comments

Whirlpool AUTOMATIC WASHER Specifications Page 45

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool AUTOMATIC WASHER