Whirlpool W10529641A Use and Care Guide Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
CHECK YOUR VENT SYSTEM FOR GOOD AIRFLOW
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death
or fire.
Good airflow
Along with heat, dryers require good airflow to efficiently dry
laundry. Proper venting will reduce your drying times and
improve your energy savings. See Installation Instructions.
The venting system attached to the dryer plays a big role
in good airflow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
Maintain good airflow by:
[]
[]
Cleaning your lint screen before each load.
Replace plastic or foil vent material
with 4" (102 mm) diameter heavy, rigid
vent material.
[] Use the shortest length of vent possible.
[] Use no more than four 90° elbows in a vent system;
each bend and curve reduces airflow.
Better_
[] Remove lint and debris from the exhaust hood.
[] Remove lint from the entire length of the vent system
at least every 2 years. When cleaning is complete, be
sure to follow the Installation Instructions supplied with
your dryer for final product check.
[] Clear away items from the front of the dryer.
FUse Automatic Cycles for better fabric care and energy savings
Use the Automatic Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Cycles,
drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer
shuts off when the load reaches the selected dryness. Use the NORMAL dryness level to provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to
over-drying. Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
fTips for getting the best performance from your steam dryer
[] Results may vary depending on fabric. 100% cotton [] Cycles that use steam are not recommended for items that
garments with wrinkle-free finish may yield better results have been starched. Wash any starched or new garments
than those without. 100% cotton items may require prior to using a cycle that uses steam.
additional touching up after cycles that use steam. [] Some Models: The Steam Refresh Cycle is best for
[] Use of fabric softener sheet is not recommended with smoothing out wrinkles and reducing odors from loads
cycles that use steam. It may cause temporary staining consisting of dry items of wrinkle-free cotton, cotton-
on clothes, polyester blend, common knits, and synthetics.
5
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 39 40

Comments to this Manuals

No comments