Whirlpool WHD3090GW Installation Manual download pdf (Page 22)

1. Prepare your 3-wire cable

for direct connection

(25 mm)

3½"

(89 mm)

5. Connect remaining wires

Direct wire cable must have 5 ft. (1.52 m) of extra length so

dryer may be moved if needed.

Strip 3

" (89 mm) of outer covering from end of cable. Strip

insulation back 1" (25 mm). If using 3-wire cable with ground

wire, cut bare wire even with outer covering. Shape wire ends

into hooks.

Place hooked ends of remaining direct wire cable wires

under outer terminal block screws (hooks facing right).

Squeeze hooked ends together, tighten screws, tighten strain

relief screws, and fold insulator over terminal block. Finally,

reinsert tab of terminal block cover into slot at bottom edge

of terminal block housing. Secure cover with the 2 hold-down

screws. Now, go to “Level Dryer.”

3-Wire Direct Wire Connection

Use where local codes permit connecting cabinet-ground

conductor to neutral wire.

4-Wire Direct Wire Connection

IMPORTANT: A 4-wire connection is required for mobile homes

and where local codes do not permit 3-wire connections.

1. Prepare your 4-wire cable

for direct connection

(25 mm)

⁄

(89 mm)

(127 mm)

Direct wire cable must have 5 ft. (1.52 m) of extra length so

dryer may be moved if needed.

Strip 5" (127 mm) of outer covering from end of cable,

leaving bare ground wire at 5" (127 mm). Cut 1

" (38 mm)

from remaining 3 wires. Strip insulation back 1" (25 mm).

Shape ends of wires into hooks.

Remove center terminal block screw (B) and green external

ground conductor screw (A). Loop neutral bonding wire (white)

(D) to center terminal block.

Place hooked end (hook facing right) of neutral

wire (white or center wire) (C) of direct wire cable under center

screw of terminal block (B). Squeeze hooked ends together.

Make sure the end of neutral bonding wire (white) (D) looped

in Step 2 remains on the center terminal when the direct wire

cable neutral wire is attached. Tighten screw.

2. Prepare to connect neutral wire

3. Connect neutral wire

Connect ground wire (green or bare) (F) of direct wire cable

under green external ground conductor screw (A). Tighten

screw.

4. Connect ground wire

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

Comments to this Manuals

No comments

Whirlpool WHD3090GW Installation Manual Page 22

Comments to this Manuals

Related products and manuals for Washer dryers Whirlpool WHD3090GW