Whirlpool AWG 870 Instruction for Use

CONTENTSBEFORE USING THE WASHING MACHINEFIRST WASH CYCLEPRECAUTIONS AND GENERAL RECOMMENDATIONSDESCRIPTION OF THE WASHING MACHINECHILD SAFETYPREPARATI

64TROUBLESHOOTING GUIDEThe appliance will not start, the lamp does not light up.Check whether:• the appliance is plugged in;• the wall socket is funct

65AFTER-SALES SERVICEBefore contacting After-Sales Service:1.Try to remedy the problem yourself (see “Troubleshooting Guide”).2.Restart the programme

66INSTALLATIONRemove the transit bolts1.Slacken the three or four bolts (according to model) with the spanner supplied.2.Unscrew the bolts by hand.3.H

67Worktop for built-under models.The appliance must only be installed beneath a continuous fitted kitchen worktop.If the appliance is to be built unde

68ELECTRICAL CONNECTIONFor Great Britain onlyWarning - this appliance must be earthedFuse replacementIf the mains lead of this appliance is fitted wit

56BEFORE USING THE WASHING MACHINE1.Removing the packaging and inspection • After unpacking, make sure that the washing machine is undamaged. If in do

57FIRST WASH CYCLEPRECAUTIONS AND GENERAL RECOMMENDATIONS1.Packing• The packing material is recyclable as indicated by the recycling symbol . Adhere t

58DESCRIPTION OF THE WASHING MACHINECHILD SAFETYAn electrical device prevents the door from opening while the appliance is in operation. When the wash

59PREPARATION OF THE WASHINGSort the laundry1.Sort the laundry according to…• Type of fabric / care label symbolCottons, mixed fibres, easy care/synth

60• water hardness in your area (ask for information from your water company). Soft water requires less detergent than hard water.Notes:Overdosing the

61WASHING PROGRAMMESelect the programme:1.Check that the Programme Selector is on “Stop”.2.Plug in the appliance.3.Open the tap.4.Set the Programme Se

62REMOVING THE FILTERDRAINING RESIDUAL WATER1. Stop the appliance and unplug it.2. Open the filter cover.3. Place a bowl beneath the filter.4. Slowly

63CARE AND MAINTENANCEAppliance exterior and control panel• Clean using normal household cleaner (do not use abrasive products and no solvents).• Dry